Effects Pedals
Showing 1–40 of 137 resultsSorted by price: low to high
Guitar Pedal Power Supply
- ITE Switching Power Supply (High Grade EU Standard)
- 9V DC
- Universal compatible
- Standard EU Plug
4 Way Power Splitter for DC 12V or 9V adapters
- 4 Way Power Splitter for DC 12V or 9V adapters for Multiple Pedals Power Supply
- Recommended for pedal boards with multi effect pedals or stomp boxes
- Please use high quality power supply adapters for multiple pedals connectivity
Behringer PSU-SB Effects Pedal 9V Power Adapter
General-purpose Power Adapter
- Converts to DC 9V for use with stomp boxes and effects pedals
- Typical DC-type 2.2 mm plug with negative tip and positive sleeve
- Provides generous 100 mA current to power even digital products
- High-quality components and rugged construction ensure long life
Guitar Multi Pedals Power Supply (for 4 Pedals)
- ITE Switching Power Supply (High Grade EU Standard)
- 9V DC 2000 mA (Center Negative)
- Supports up to 8X Effect Pedals Simultaneous
- 4X Power Splitter Cable Included
Tomsline AT-07 Pedal Tuner
Tom'sline Engineering Pedal Tuner AT07
- Chromatic for Guitar (6-7 strings) and Bass (4-6 strings)
- High Definition Color Screen
- Pitch 430-450Hz 4 Flat Options
- True Bypass
- Mini Pedal Size
NUX NMP-2 Dual Foot Switch
It is a multi-foot controller specially designed for arranger instruments (Keyboards, Modules, Effect pedals…etc) Using this controller you can easily active all the main functions of the equipment.
1.This unit combines the functions of latch type and WTB-005 (momentary type) foot switches. Both of the unit’s foot switches may be set to function as either a latch or momentary type(Open, Close) switch.
2. You can connect to gear equipped with TRS 1/4” (6.35mm) Phone jacks using a connection cable with stereo 1/4” (6.35mm) phone plugs at both ends.
3. The NMP-2 can be used with Loop Core Deluxe for phrase up/down.
4. It also could be used while close mode even passive status
Vintage
Venson SCR-5 Stereo Chorus Pedal
Vintage Chorus Pedal
Stereo Chorus Pedal Excellent Condition (Pictures attached for reference) Powered via 9v Battery (Not Included) or Compatible Power Supply (Available Optional)- Original products pictures are attached in Gallery
- All used products are 100% tested before listing, at store checking available
- All used products are covered under 7-days warranty.
Tomsline ADL-3 Mini Delay
- Mini in size, fit in the hand of the adult or just put it into pocket.
- Light-weight and portable, easy to carry along.
- Allows wide range of delay time from 50ms to 400ms.
- True bypass design, minimize tone loss and get more control of your pedal.
- 3 adjustable knobs: Time, Feedback, Level. Powered by a 9V power adapter
KLIQ TinyTune Chromatic Tuner Pedal
We know there's only so much room on your pedalboard. Here's a no-nonsense mini pedal that will get you ready to rock in seconds...
- FAST & ACCURATE: Experience speedy tuning with A1 precision. Housed in a mini pedal that's designed to fit on any pedalboard, the TinyTune lets you to spend less time tuning and more time playing.
- EASY-TO-READ DISPLAY: The color display is large, clear, and has excellent visibility under any lighting. So whether you are playing at home, on a dark stage, or outdoors, this pedal has you covered!
- ZERO NOISE: The TinyTune completely mutes the input signal when you're tuning, and directly routes the signal to the output when you're not. No tone coloring, or annoying "pop" and "hum" noises here.
- BUILT TO LAST: With rugged aluminum on the outside and quality components on the inside, this pedal will perform night after night, stomp after stomp. So that you can sound your best every single time.
NUX PT-6 Pedal Tuner with True Bypass
Very sensitive chromatic tuning mode with a wide range.
Bright LED screen allows a clear visibility both on stage and outdoors. True Bypass Circuit allows tuning without any signal loss or latency. If signal is lost after 5 minutes, power save function will shut the pedal off automatically.
Tomesline ADT-1 Distortion
Tube distortion simulation and built-in FET transistor.
True bypass design, minimizes tone loss and get more control of your pedal.
High gain distortion, low power consumption.
3 adjustable knobs: Gain, Tone, Level
Gain knob : Adjusts the amount of distortion. Rotating it clockwise increases the effect, whereas counterclockwise rotation reduces the effect.
Tone knob: Controls the tone. Rotating the knob counterclockwise will make the sound milder, while rotating it clockwise will make the sound sharper.
Level knob: Adjusts the level of the effect sound.
Aluminum alloy housing, sturdy and durable.
Durable jacks and foot switch.
Designed with on / off LED, instructs effects status.
Powered by a 9V AC power adapter or 9V battery
Donner DT-1 Chromatic Pedal Tuner
DT-1 pedal tuner is a powerful and stable floor-to-ceiling pedal tuner. The true bypass system allows you to restore 100% of your sound into the amplifier. The high-brightness LED lights and LCD display allow you to tune more quickly. The wide tuning range allows the DT-1 pedal tuner to adapt to more instruments.
Dual mode tuner
The DT-1 has a dual independent channel mode. As long as you step on the tongs to enter the tuning mode, you can cut off all signal output to achieve the silent effect, allowing you to quietly adjust your instrument to the best condition and intonation in front of the audience on stage. Another step on the nail DT-1 will turn off tuning mode and go into bypass mode, while turning off the LED lights and display, allowing the sound of your instrument to revert back to the amplifier without affecting all the stage effects.
Precise and powerful tuner
Chromatic which is suitable for wide range tuning. LED Light indicator shows the working state. LCD display leads clear results of tuning. And it’s easy to read the right tone. Tuning range is A0(27.5Hz) ~ C8(4186Hz). New fast precise strobe mode with +/- 1 cent accuracy. Enjoy your own fun and colorful life.
Easy-peasy usage
DT-1 pedal can be turned on with just a simple guess on the nail. The color and brightness of the specially adjusted LED beads match the mini LCD screen, which can be used on the large stage and outdoor performance venues without any problems. The rugged shell can be used in any setting, providing a stable and reliable support for your performance. You just play as much as you want and we'll take care of the rest.
Product Description
1.Power Supply: 9V DC(Optional).
2.LED Light: LED indicator shows the working state.
3.LCD Screen: LCD display leads clear results of tuning.
4.Input & Output Jack: Analogy though 1/4’’ mono audio jack.
5.True Bypass: True bypass for zero tone coloration.
Tomeline AMD-1 Metal Distortion
High gain distortion, low power consumption.
True bypass design, minimize tone loss and get more control of your pedal.
3 adjustable knobs: Gain, Tone, Level
Aluminum alloy housing, sturdy and durable.
Durable jacks and foot switch.
Designed with on / off LED, instructs effects status.
Powered by a 9V AC power adapter or 9V battery
Behringer FX600 Digital Multi-FX
Digital Multi-effects Pedal with Chorus, Flanger, Phaser, Delay, Tremolo, and Pitch Shifter
Behringer CS100 Compressor Sustainer
Compressor/Sustainer Pedal with Level, Tone, Attack, and Sustain Controls
Donner Tutti Love Chorus Pedal
Classic chorus sound
Carefully selected components
The Tutti Love pedal was designed and manufactured with quality components to ensure exceptional sound and sturdy performance. The aluminum alloy casing ensures touring reliability, and the True Bypass circuitry gives you a transparent tone.
Easy Controls, Wide Flexibilities
The Tutti Love has a simple configuration with three controls - Rate, Level and Depth.
Classic chorus sound
Featuring a pure analog design, the Tutti Love pedal delivers the smooth, natural chorus tones embraced by jazz, rock, and pop artists for decades.
Parts Description:
1.DC 9V Input
2.Level Control
3.Depth Control
4.Rate Control
5.Input
6.Output
7.Footswitch
NUX Phaser Core
Depths of Phaser Lots of famous guitarists are remembered with their guitar tones with phaser The effect has been used for rock, pop, jazz, funk and even metal music
Phaser Core's user friendly and simple controllers and 2 types of phaser modes made this famous equipment an all-time-favorite for professional artists and hobbyists. Its versatile 4 or 8 stage phaser circuit design allows a wide variety of sounds with an affordable price.
NUX Metal Core Distortion Pedal
Nux Metal Core Pedal Effect
The Nux Cherub Metal Core Guitar Effects Pedal is a guitar effects pedal with 2 types of metallic sounds and a built-in 2-Band EQ. This metal core features in tone lock function which will ensure the preset will not be changed during performance by disabling the button function. True bypass design minimizes loss of tone.
Diagram
- Power in
- Gas knob : Metal gain control
- Bass knob : Adjust the bass of the metal
- Out jack: Connect the core to the guitar amp
- On / Off toggle
- Variable tone lock & toggle switch: Select Voice 1 or Voice 2; freeze the current by switching it to the middle position
- Lever class : Metal level control
- Treble knob : Treble metal
- LED Indicator : Shows effect status - On / Off
- Input jack : Connect the core to the guitar
- Presets : 1 storable user presets
- Sampling frequency : 44.1 kHz
- Digital A / D : 24-bit
- Signal processing : 32-bit
- Frequency Response : 20Hz-20000Hz ± 1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic Range: 100dB
- Input : -20dBV
- Output : -10dBV (10k output load impedance Or more)
- Power : 9V DC (9V Battery or ACD-007A Adapter) (not included)
NUX Flanger Core
Intense Flanger Producing a broad range of sound samples, dramatically enhancing the effect of any kind of amplified musical instrument and even voice or percussive instruments The capabilities of the Flanger Core are numerous and astounding.
Effects such as rotating speakers, chilling vibrato, jet sounds, resonance modification, intensified studio flanging with 2 different modes.
You can save your presets with using T-Lock switch and protect your sound against any accidents while you perform on the stage. Also you can carry your presets everywhere with "save your parameters as preset" option to recall your settings whenever you want.
NUX Chorus Core
Create classically lush, liquid textures with the most affordable price. Rate, Tone, and Depth controls, as well as knobs for cutting High and Low frequencies allow ultimate tone control.
You can save your presets with using T-Lock switch and protect your sound against any accidents while you perform on the stage. Also you can carry your presets everywhere with "save your parameters as preset" option to recall your settings whenever you want
NUX Scream Bass Overdrive
Scream Bass is an analog overdrive specially designed for bass player. With simple GAIN, LEVEL, HI and LOW knobs, you can get the tone from overdrive to fuzz!
- Analogue Circuit Gain
- Level, Hi, Low
- Mix True bypass
NUX AS-4 Amplifier Simulator
AS4 Modern Amp Simulator is low cost but screams with the same kind of fat, warm, blazing sounds of the original amplifiers.
Find the tone you want using high and bass EQ, set your level, dial up distortion with the gain knob, then hit the "on" switch. The AS4 Modern Amp Simulator is truckload of real amps in just one pedal!
Tomsline APE-3S Digital Delay
TOMSLINE APE3S MICHAEL ANGELO BATIO SIGNATURE SERIES – DELAY
Amazing Sound and Versatility in a small package. Boutique Quality Sound and Construction for a FRACTION of the price!
FEATURES
APE-3S Pure Echo, Signature Michael Angelo Batio digital delay mini pedal
Digital delay
level,regen and time control
3 options of echo, mod and normal
True bypass
Tomsline ADL-1 Delay
Allows wide range of delay time from 50ms to 400ms.
Built-in digital integrated circuit.
True bypass design, minimize tone loss and get more control of your pedal.
3 adjustable knobs: Time, Feedback, Level
Time knob: Adjust the delay time(50ms to 400ms). Turning this knob clockwise increases the delay time, and counterclockwise decreases it.
Feedback knob: Decide how many times the delay sound is to be repeated. Turning this knob clockwise increases the number of repetition of delay sound, and turning this knob fully counterclockwise produces single delay sound.
Effect Level knob: Control the output level of the delay sound.
Aluminum alloy housing, sturdy and durable.
Durable jacks and foot switch.
Designed with on / off LED, instructs effects status.
Powered by a 9V AC power adapter or 9V battery
Vintage
Denio FL20 Flanger
Vintage Analogue Flanger Pedal
Controls: Manual, Depth, Rate, Res Excellent Condition (Pictures attached for reference) Powered via 9v Battery (Not Included) or Compatible Power Supply (Available Optional)- Original products pictures are attached in Gallery
- All used products are 100% tested before listing, at store checking available
- All used products are covered under 7-days warranty.
Behringer BDI21 V-Tone Bass Driver DI Pedal
A Bass DI with Vintage Tube Amp Emulations
- V-Tone modeling technology puts a massive array of vintage tube amps right at your feet
- Authentic tube emulation circuitry can be mixed with the direct bass signal via blend control
- Presence control for definition and upper harmonics
- 2-band EQ for ultra-musical sound-shaping
- Dual DI mode provides versatile functionality
- Class-D technology puts massive sound in a small package
- Ground lift switch eliminates typical ground loop problems
Donner Ultimate Compressor Pedal
The Ultimate Compressor is a true analog pedal which captures warm, studio like tones. Note: Please use a power adapter with a voltage of DC9V, an internal negative and external positive polarity and a current of 500mA or more to power your pedal. Failure to do so can cause serious situations where the product does not work or is damaged.
Quality Compression
The Ultimate Compressor is inspired by compression and limiter units used in high-end recording studios, resulting in a warm, smooth compression tone.
Simple and Effective
The Ultimate Compressor was designed to allow the user to easily control their sound with three controls. Tone, Comp and Level.
Two Modes
This pedal has two modes. Normal and Treble. Normal allows a more rounded compression, and Treble creates a brighter compression sound.
More detail:
1. 9V input: For a power supply, use a 9-volt DC adapter, with at least 500mA (center negative).
2. Tone Selector: Switches between two modes: NORMAL: Neutral compression tone. TREBLE: Brighter compression tone.
3. LEVEL Control: change the output volume.
4. TONE Control: change the effect tone.
5. COMP Control: change the intensity of compression.
6. Input and Output: 1/4 mono audio jacks, for connecting to your guitar, other effects, or an amplifier.
7. Foot Switch : Tap to switch to turn the unit on or off. The LED will light up when the effect is on.
JOYO JF-35 PocketMetal High Gain Distortion
The JOYO JF-35 pocket metal sounds like a Randall on roids. The pocket metal is suited for metal and does fine in a hard rock setting as well.
One really great feature is the pedal isn't noisy at volume. That's thanks to the quality components, such as the quarter inch input and output jacks, a clean DC power circuit 9 volt DC battery included and other parts of quality including the capacitors, resistors and of course, smooth pots volume and tone knobs.
Speaking of which, the JF-35 has a unique mid-range control adjustment, as this frequency range is of more concern in heavy metal than the highs are. Scoop or add grit, just by making a quick adjustment on the huge bright white knob. All told the JF-35 from JOYO audio gets the job done and leaves you with spending cash to invest in strings, cables and all the other essential gear that it takes to make great music. The pocket metal distortion pedal will inspire you and afford you with that modern metal crunch.
Danelectro D-1 FAB Distortion
Danelectro D-1 FAB is a fat and warm vintage distortion pedal, priced for players.
In the late '70s a tiny effects maker in Japan produced a small quantity of what many believe is the definitive distortion box. It had delicious tonality and was highly responsive and versatile. Danelectro offers you the D-1 Fab Distortion as a sonic equivalent to the prized original. It's equipped with Level, Tone, and Distortion controls. You'll adore it.
Features:
- Warm vintage distortion
- Responsive
- Versatile
- Level, Tone, and Distortion knobs
- The FAB Distortion is a ground distortion that produces the distortion sound of the legendary 70's.
NUX Drive Force Modeling Stomp Simulator
With ten models including booster, tube overdrive, and distortion, Drive Force gives you all pedal sounds you'll ever need. With its Dual Engine and A/B output, Drive force allows you to mix two-drive sounds together and pan it to two outputs. A switchable noise gate and 12 cabinet models can be applied to any of the models.
Specification:
Effects types
10 modeling stompbox models
Presets
Up to 9 storable user presets plus manual mode
Sampling frequency
44.1 kHz
A/D converter
24-bit
Signal processing
32-bit
Frequency response
20Hz-20kHz ±1dB
THD+N
93dBu (＜0.003%) A-Weighting
Dynamic Range
100dB
Input
-20dBV@1MΩ
Output
-10dBV(Output load impedance of 10 KΩor more)
Display
128*128 TFT
Power
9V DC (9V battery or optional ACD-007A Adaptor)
Donner Dynamic Wah Auto Wah Pedal
Create The Moment
Easy controls, wide flexibility
4 parameter controls give you full access to effect details.
SENS controls the sensitivity. RES controls the filter sharpness. DECAY controls the filter frequency to fall back to the resting point. RANGE controls the filter frequency range.
Versatile Envelope Filter
True bypass switch lets your instrument’s signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
An analog auto-wah effect in the whole Aluminium-alloy stomp box.
Efficient Chip
High-quality Electronic components and circuit design keep your tone clear and pure.
Fully controllable envelope filter with unique decay control, highly accurate, and very fast tracking. This crafty circuit enables incredibly responsive envelope performance, even during rapid-fire playing.
Specifications:
- 1. Power Supply: 9V DC (Sold separate)
- 2. Res Knob: Control the filter sharpness
- 3. Sens Knob: Controls the sensitivity
- 4. Decay Knob: Control the filter frequency that falls back to the resting point
- 5. Range Knob: Adjust the filter frequency range
- 6. Input & Output Jack: Analogy though 1/4’’ mono audio jack
- 7. LED indicator shows the working state
- 8. True bypass for zero tone coloration
Tomsline AEB-1 Bass Equalizer
- Exclusive for electric bass.
- 5-band frequency adjustable: 50Hz, 150Hz, 500Hz, 3000Hz, 9000Hz.
- Volume adjustable +-14dB Super low power consumption.
- Quiet IC chip inside True bypass.
- LED light indicating operation situation and battery condition.
KOKKO FOD3 Overdrive Pedal
- Delivers that warm, natural tube overdrive sound.
- By rotating the knobs you can boost the guitar amp for colorful tone or overdrive itself for unique pedal sound.
- True bypass hardware switching.
- LED indicator shows the status of effect.
- Powered by AC adapter.
- Mini and portable, enclosure is aluminum alloy shell.
- Rubber pads on the backside is anti-skid, which enhances the stability and avoids friction between the effect pedal and the ground.
- Brand: KOKKO
- Main Material: Aluminum alloy
- Input Impedance: 1M Ohms
- Output Impedance: 10K Ohms
- Power Supply: AC adapter 9V DC minimum 300mA(not included)
NUX HG-6 High Gain FET Distortion
The Nux HG-6 Pedal includes an impressive high gain which creates an aggressive distortion. The FET simulates the sound of a tube amplifier. This pedal's true bypass provides a transparent tone.
- Very high gain makes the distortion sound aggressive
- Active middle frequency eq circuit
- Led indicator shows status of effect and battery condition
NUX Konsequent Digital Delay
Excellent digital delay is more than the simple repetition of sound. It’s a dynamic creation of consecutive sound . . . desired consequence. When great sound engineers mix multiple delay onto a guitar recording track, there are some inherent challenges: Increase the rhythmic complexity without losing definition. The desired effects can range from trippy to groovy . . . or a blend of both. Konsequent packs an array of internal processors that replicate the very sound experienced studio engineers were perfecting in the 1980's using expensive rack-mount digital delay systems.
The Konsequent does it at a fraction of the cost, and with the convenience of a mini-pedal.
Features:
NUX's Intelligent Digital Processor, designed to reduce annoying interference caused by audio peak.
NUX's Analog Processor plus Saturation-Simulator offering an abundance of overdrive range.
MODES:
GROOVE PATTERN (Dotted 8). Multi-Delay Output.
REGULAR PATTERN (Simple Delay) Warm, yet purposefully defined
NUX MINI Monterey Vibe
NUX Monterey Vibe, born to recreate the grand, yet complex, psychedelic rock guitar sound of the 1960's and 70's. It features all of the classic Uni-vibe style selections: Chorus, Rotary-Speaker, and Phaser pedal. We modernized the original 4 stage phaser circuit ( a pulsating bulb surrounded by 4 photo-resistors ) by replacing it with a powerful 32Bit floating DSP to process our custom algorithm. What was the outcome? A perfect mimic of the complex physical-phenomena of its original analog circuitry.
NUX Monterey Vibe generates a truly unique effect tone; a mix of chorus, tremolo, rotary, and phaser. This unique tone can be found in Pink Floyd’s ‘Breathe’, Robin Trower’s ‘Bridge of Sighs’, and the haunting audio mood created for ‘Machine Gun’ by Jimi Hendrix.
The earliest Uni-Vibe effect pedal came out in the 1960‘s. Cutting-edge guitarists were seeking a replacement for the heavy rotary speaker amplifier--configured from a standard amplifier for the electronic pipe organ. The original Leslie speakers did have a charm of their own, but it was more than compensated for by gaining the phaser effect, and the ease-of-use of a simple pedal configuration.
Just like the traditional Uni-Vibe pedal, you can switch between Chorus ( the Uni-vibe effect ) or Vibrato, by simply holding the foot-switch. In Chorus mode, the mix of Phaser and dry guitar signals produces a classic Rotary sound. In Vibrato mode, your pitch modulates between high and low. Both modes yield a rich, vintage vibe at any speed, intensity, or volume.
NUX MINI Brownie Distortion
Shopping for a British distortion pedal? Try the NUX Brownie!
The Classical British rock tones of the 1970’s, packed into one little box.
By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced.
Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted.
Nux Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialing-in the high-end response.
The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. True bypass circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.
NUX OD-3 Overdrive
If you are searching for a guitar distortion of good quality, this pedal will be a wise choice. It is designed with true bypass which can reduce tone loss to the least. It has 3 adjustable knobs and is powered by 9V battery or AC 9V adapter to increase the power of signal. Get one and enjoy a powerful musical feast.
- Overdrive Guitar Electric Effect Pedal
- By rotating the knobs you can boost the guitar amp for colorful tone or overdrive itself for unique pedal sound.
- True bypass design, minimizes tone loss and get more control of your pedal.
- Aluminum alloy housing, good durability.
- LED indicator shows status of effect and battery condition.
NUX NOD3 Morning Star Overdrive
Go from Blues-Breaker to Blues-Sky Rocket!
The Morning Star lights up all of the classic aspects of a great blues breaker pedal, but we added something stellar to improve the high-frequencies. Engage the Morning Star foot-switch to add more overhead with saturated grit to your clean tones, and if you wanna’ boost your high-frequencies to a whole other stratosphere, press/hold the foot-switch to activate the Shine circuit which adds a whole new level of tone brightness. A Simple Pedal, Loaded with Massive Tone! 0 to 5 on the Drive-Knob yields a balanced overdrive to your clean tone. Tweak it up for thick overdrive with a bit more gain. The tone control has superb tone range from Dark to Morning Star bright. And, whenever you want your blues riffs to light up the skyline, the Shine circuit is always there waiting for your cue to come over the horizon. You also get 2 bypass options: True Bypass or Buffer Bypass for your essential signal chain needs. True Bypass or Buffer Bypass A lot of professional guitar players start their signal-chain with a stand-alone buffer. it has optional True Bypass / Buffer Bypass modes for running the pedal. Push and hold the foots-witch and power up the pedal to select True (Red LED indicator) or Buffer (Green LED indicator) bypass mode.
Donner Morpher Distortion Pedal
Mini High Gain Monster
Inspired by legendary high gain amp stacks, and adding a wide dynamic range, high definition sound, and flexible onboard controls, the Morpher delivers a huge modern high gain distortion sound suitable for both shredding and riffing. Get those full stack amplifier distortion tones. Maintaining a natural sound, there will be no overhyped frequencies, no muddy bass, and no excessive mids with this pedal. This high-gain distortion pedal has excellent dynamic response and high signal definition especially suited for lead guitar. There are three function knobs: LEVEL, TONE and GAIN. LEVEL is used to set the distortion volume. TONE is to set the brightness of your tone. GAIN is used to set degree of distortion. There are three distortion models: Natural, Tight, and Classic.Mini High Gain Monster
The Morpher is a mini modern high gain distortion pedal inspired by the huge high gain amp stack sound. By switching it on, the Morpher can transform any gentle clean amp into a high gain monster!
3-Way Tone Switch
Natural: Neutral mode that delivers an organic, natural tone Tight: A more aggressive tone with enhanced bottoms and edges Classic: Provides a classic UK-style high gain sound with warm mids
Easy Controls, Wide Flexibilities
The Morpher features an easy-to-use three-knob control scheme: LEVEL (output volume), TONE (brightness), and GAIN (distortion amount) for use in different scenarios. Each knob gives you a wide control range.