Back to Effects Pedals
Danelectro D-1 FAB Distortion
PKR 12,500
Danelectro D-1 FAB is a fat and warm vintage distortion pedal, priced for players.
In the late ’70s a tiny effects maker in Japan produced a small quantity of what many believe is the definitive distortion box. It had delicious tonality and was highly responsive and versatile. Danelectro offers you the D-1 Fab Distortion as a sonic equivalent to the prized original. It’s equipped with Level, Tone, and Distortion controls. You’ll adore it.
Features:
- Warm vintage distortion
- Responsive
- Versatile
- Level, Tone, and Distortion knobs
- The FAB Distortion is a ground distortion that produces the distortion sound of the legendary 70’s.
Related products
DigiTech Bad Monkey Analog Tube Overdrive
DigiTech Bad Monkey Tube Overdrive Features:
- Delivers an overdriven tube-style sound for leads and chords
- Easy-to-use 4-knob controls for quick setting changes
- Level, Low, High and Grunge controls, plus On/Off footswitch
- 1/4" TS Input jack
- Amp Out jack for amplifier connection
- Mixer Out jack with built-in cabinet emulation for direct connection to mixer
- 9 Volt Alkaline Dry Battery with approximately 18 hours of continuous use
- Optional PS200R power supply provides 4.8 watts
- 4 15/16" length x 3 1/8" width x 2 1/8" height
- Weight 1.38 lbs.
NUX DS-3 Distortion
Absolutely Distorted!
NUX DS3 is an analog distortion pedal perfect for classic rock and heavy blues. Analog circuits boost your signals and make more harmonics and strong overdrive. It is possible to create good balanced sounds using gain knob and wide-ranged tone knob.- Vintage brown sound, warm but wild, if you like Eddie Van Halen, get it !
- Level, Gain and Tone knob help you adjust your favorate tone easily
- High gain and large adjustability rang, suit for various music styles
- 9V DC power supply adapter ( negtive inside ,not included) or battery
- Material of housing: Aluminum alloy
- Effect types: 12 modulation model
- Presets: Up to 9 storable user presets plus manual mode
- Sampling frequency: 44.1 kHz
- A/D converter: 24-bit
- Signal processing: 32-bit
- Frequency response: 20Hz-20kHz ¡À1dB
- THD+N: 93dBu (<0.003%) A-Weighting
- Dynamic range: 100dB
- Input: -20dBV@1M?
- Output: -10dBV (output load impedance of
- 10k Ohms or more
- Display: 128*128 QVGA TFT
- Power: 9V DC (9V battery, DC adapter (Optional)
NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design
NUX Metal Core Distortion Pedal
Nux Metal Core Pedal Effect
The Nux Cherub Metal Core Guitar Effects Pedal is a guitar effects pedal with 2 types of metallic sounds and a built-in 2-Band EQ. This metal core features in tone lock function which will ensure the preset will not be changed during performance by disabling the button function. True bypass design minimizes loss of tone.
Diagram
- Power in
- Gas knob : Metal gain control
- Bass knob : Adjust the bass of the metal
- Out jack: Connect the core to the guitar amp
- On / Off toggle
- Variable tone lock & toggle switch: Select Voice 1 or Voice 2; freeze the current by switching it to the middle position
- Lever class : Metal level control
- Treble knob : Treble metal
- LED Indicator : Shows effect status - On / Off
- Input jack : Connect the core to the guitar
- Presets : 1 storable user presets
- Sampling frequency : 44.1 kHz
- Digital A / D : 24-bit
- Signal processing : 32-bit
- Frequency Response : 20Hz-20000Hz ± 1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic Range: 100dB
- Input : -20dBV
- Output : -10dBV (10k output load impedance Or more)
- Power : 9V DC (9V Battery or ACD-007A Adapter) (not included)