NUX NMP-2 Dual Foot Switch
PKR 8,000
It is a multi-foot controller specially designed for arranger instruments (Keyboards, Modules, Effect pedals…etc) Using this controller you can easily active all the main functions of the equipment.
1.This unit combines the functions of latch type and WTB-005 (momentary type) foot switches. Both of the unit’s foot switches may be set to function as either a latch or momentary type(Open, Close) switch.
2. You can connect to gear equipped with TRS 1/4” (6.35mm) Phone jacks using a connection cable with stereo 1/4” (6.35mm) phone plugs at both ends.
3. The NMP-2 can be used with Loop Core Deluxe for phrase up/down.
4. It also could be used while close mode even passive status
Related products
Boss MT-2 Metal Zone Distortion Pedal
Made for Heavy Metal Rockin'
The BOSS MT-2 Metal Zone distortion pedal is one of most popular pedals - with good reason! Its unique dual-gain circuitry provides you with distortion tones that sound positively huge. You get insane levels of saturation, super-long sustain, and heavy mids and lows that are reminiscent of a stack of overdriven amps. On top of that, its 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options, giving you command over a wide range of over-the-top distortion textures. Make no mistake - if you're a hard rock or metal guitarist, then the BOSS MT-2 Metal Zone distortion pedal should be an integral part of your tonal assault. BOSS MT-2 Metal Zone Distortion Pedal Features at a Glance:- Unique dual-gain circuitry creates incredible-sounding distortion
- Provides super-long sustain and heavy mids and lows like a stack of overdriven amps
- 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options
- Tailor-made for hard rock and metal guitarists
NUX Metal Core Distortion Pedal
Nux Metal Core Pedal Effect
- Power in
- Gas knob : Metal gain control
- Bass knob : Adjust the bass of the metal
- Out jack: Connect the core to the guitar amp
- On / Off toggle
- Variable tone lock & toggle switch: Select Voice 1 or Voice 2; freeze the current by switching it to the middle position
- Lever class : Metal level control
- Treble knob : Treble metal
- LED Indicator : Shows effect status - On / Off
- Input jack : Connect the core to the guitar
- Presets : 1 storable user presets
- Sampling frequency : 44.1 kHz
- Digital A / D : 24-bit
- Signal processing : 32-bit
- Frequency Response : 20Hz-20000Hz ± 1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic Range: 100dB
- Input : -20dBV
- Output : -10dBV (10k output load impedance Or more)
- Power : 9V DC (9V Battery or ACD-007A Adapter) (not included)
Boss SD-1 SUPER OverDrive
The Boss SUPER OverDrive SD-1 gives you the warm, smooth distortion of an overdriven tube amp without blurring the nuances of your picking technique. The unique symmetric drive circuit delivers a more rich, authentic-sounding overdrive effect. Here's an overdrive pedal that has Level, Drive, and Tone controls that make it easy to go from mild to hard, or even use the SD-1 as a signal booster.
- Warm, smooth distortion
- Unique symmetrical gain circuit
Vox V847- A Classic Reissue Wah Pedal
The Sound of a Classic!
The Vox V847-A wah pedal improves on the V847's popular design with increased dynamics and functionality, thanks to a few design changes. A redesigned inductor brings the new pedal's specs even closer to that of the original. and an added input buffer prevents impedance loading of the guitar signal to preserve your guitar's tone in bypass mode. By staying true to the tone and vibe of the 1960s-era Vox wah while enhancing its legacy, the V847-A offers you a modern update on a true classic. Vox V847-A Wah Pedal Features:- Classic Vox sound and styling
- Redesigned inductor brings sound even closer to that of the original
- Added input buffer prevents impedance loading of guitar signal to preserve guitar's tone in bypass mode
- 9V power supply input for connection of AC adapter
