Back to Guitar Gear Equipment
Camelion Plus Alkaline 6LR61 9V Battery for Guitars
PKR 450
Compatible with All Guitar Preamps & Pickups with 9V Power In
| Int. Frame size to IEC | 6LR61 |
|---|---|
| Frame size | 6LF22 |
| Dimensions (L x T x H mm) | 26,2 x 17,2 x 48,3 |
| Weight (g) | 45,3 |
| Electrochemical System | Alkali manganese dioxide |
| Nominal Capacity | 700mAh to 4,8V (20±2° C rated capacity at 25mA continuous drain) |
| Nominal Voltage | 9,0V |
| Jacket | Aluminiumfoil |
Related products
NUX Pocket Port Portable Guitar USB Audio Interface
Pocket Port mobile audio interface is ultra high performance device for guitarist and bassist, compatible with WINDOWS and MAC computers. It's equipped with a high-impedance input jack of guitar and bass and 3.5mm stereo headphones output, plus powerful control sliders that are perfect for recording sessions. 192kHz/24bit and ultra low latency driver offer premium performance, you are able to have high quality music recording. With its pocket design and stable operation, Pocket port is the perfect audio interface for musicians' requirement.
- Mini size, portable, 192kHz/24bit ultra high resolution USB interface
- 3.5mm stereo headphones output. USB 2.0 interface.
- Low latency ASIO(Windows) and Core Audio(Mac) drivers, also compatible with iPhone and IPAD.
- USB bus powered with low power consumption.
- Mono input jack and stereo output
- Input: 1 mono channel
- Output: 1 stereo channel
- Sampling Accuracy: 24bit
- Sampling Rate: 44.1/48/88.2/96/192kHz
- Input Level: -20dBu
- Interface: USB 2.0
- Power Consumption: 140mA
Behringer FCB1010 MIDI Foot Controller
Super-flexible MIDI controller.
If you've got a MIDI rig you need to tame, you'll find the Behringer FCB1010 MIDI Footcontroller indispensable. With 10 banks of 10 presets, you'll have plenty of storage space. Each preset can send 5 MIDI program change commands and 2 MIDI control commands simultaneously so you can configure an entire synth rack with one stomp.
2 expression pedals independently control any MIDI channel, controller number, and range. The footswitches can also be configured to send MIDI note numbers, perfect for tap-tempo functions. 2 programmable, relay-controlled footswitch jacks are great for switching guitar amp channels via MIDI.- 10 banks of presets
- 2 expression pedals with freely assignable MIDI channel, controller number, and range
- Simultaneous transmission of five MIDI program change commands and two MIDI control commands per preset
- MIDI note-on commands for trigger and tap-tempo applications
- 2 programmable, relay-controlled switch jacks
Your rig's grown by leaps and bounds, so take a leap and escape your bounds - get the Behringer MIDI footcontroller today.
Price Drop!
Original price was: PKR 16,500.PKR 15,000Current price is: PKR 15,000.
Add to cart
Behringer Ultra-DI DI20 2-channel Active Direct Box / Splitter
Presto Chango DI Box
The Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter can convert two separate unbalanced 1/4" inputs into two balanced XLR outputs. Need a signal splitter? The DI20 does that too. Whether you're a keyboardist, guitarist, or bassist, you'll marvel at the flexibility this little box gives you. Feed it two mono signals, a stereo signal, or a split signal feeding two separate amps. You also get a groundlift and a 3-position input attenuator to school unruly signals - so you can even connect it to your guitar amp's speaker output! The Behringer Ultra-DI DI20 is cool. Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter Features at a Glance:- Multi-purpose direct injection box for stage and studio applications
- Provides impedance and signal matching for direct connection of instruments to mixers and amplifiers
- Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs
- Additional Split mode (channel 1 assigns signal to both XLR outputs)
- Ultra-flat frequency response due to servo-balanced operation
- Internal battery automatically shuts off when phantom power is applied
- Allows direct connection to speaker outputs with up to 3,000W
- Groundlift switch eliminates typical ground loop problems
- Input 2 usable as channel 1 Link output (additional to XLR output)
- TRS and gold-plated XLR connectors
- Ultra-rugged, road-suitable metal case
- High-quality components and exceptionally rugged construction ensure long life
HL-178 Sound Hole Pickup For Acoustic Guitar
HL-178 Sound Hole Pickup For Acoustic Guitar With Tone Volume Control
Feature a wide frequency response for clean and accurate amplified tone.
Include tone and volume control.
Convenient positioning, held tightly by moving the crank.
Sponge lines the inside edges of both mounting brackets against sliding and damage to guitar.
Including a 3.5m guitar lead (1/8" to 1/4") connecting to any guitar amplifier.
Suit sound board thickness of up to 5mm around sound hole.
Suitable for all acoustic guitars and classic guitars.
Easy installation and removal.
