AKLOT ATX-01 2.4GHz Guitar Wireless System
PKR 12,500
Plug and Play】Supports 4 sets of devices working simultaneously, wireless guitar transmitter-receiver one-to-one and no-interference; and one transmitter can transmit a signal to several receivers at the same time also.
【Impressive Perform】Crystal-clear sampling at frequency range spanning 10Hz to 22kHz, you can capture and transmitted the most subtle of nuances with our wireless guitar system Transmitter Receiver.
【20m Stable & Clear Signal Transmission】Our guitar wireless system apply 2.4GHz Chip, uncompressed signal transmission, low noise, and latency, the effective range is about 20 meters.
【Suitable for Variety Occasions】270° rotatable plug design. Fit for all the electronic music instruments with a 6.35 jack, this wireless guitar/instrument transmitter receiver system can be used for electric guitar, violin, bass, effet pedal, and keyboards, etc.
【Long Working Time & Rechargeable】Built-in rechargeable lithium battery, working hours over 10 hours for 1.5 hrs charging, the package of wireless guitar transmitter comes with a USB cable for convenient recharging.
Related products
Line 6 POD Studio GX Compact Guitar Interface
A Killer Gear Modeling Plug-in Plus an Interface!
The POD Studio GX is a powerful software and hardware recording solution that's designed with guitarists in mind. POD Studio GX includes a single-channel audio interface that's purpose-designed for recording a guitar or bass — and capable of recording at better-than-CD quality. You also get the POD Farm plug-in, which offers up a dream collection of classic and modern amplifiers, stompboxes, studio effects, and even vocal preamplifiers, so you can achieve virtually any sound imaginable with Line 6's POD Studio GX!- Includes a USB audio interface for recording
- POD Farm plug-in software with killer models and effects
- Includes USB 1.1/2.0 recording interface
- 1/4-inch guitar input
- 1/8-inch stereo headphone/line out
- USB bus-powered with LED status indicator
- ASIO, WDM and Mac OS X Drivers
- 18 immortal guitar amps (modeled after Fender Deluxe Reverb, Marshall JCM-800, Vox AC-30 Top Boost, Mesa/Boogie Dual Rectifier, and more)
- 24 guitar cabinets
- 5 bass amplifiers
- 5 bass cabinets
- 29 essential stompbox and studio effects (modeled after EP-1 Tube Echoplex, Ibanez Tube Screamer, MXR Phase 90, LA-2A studio compressor, and more)
- 6 microphone preamplifiers (modeled after Neve 1073, Avalon Vt737, API 512c, and more)
- FX Junkie Model Pack with 35 effects models
Line 6 POD Studio UX1 Audio Interface
Killer Gear Modeling Plug-in Plus an Interface!
The POD Studio UX1 is a powerful software and hardware recording solution that's designed with guitarists in mind. POD Studio UX1 includes a 3-channel audio interface with one microphone input, one guitar/bass input, and stereo line inputs for gear such as keyboards and drum machines. You also get the POD Farm plug-in, which offers up a dream collection of classic and modern amplifiers, stompboxes, studio effects, and even vocal preamplifiers, so you can achieve virtually any sound imaginable with Line 6's POD Studio UX1!- Powerful and versatile 3-channel USB audio interface
- POD Farm plug-in software with killer models and effects
- Includes 3-channel USB 1.1/2.0 recording interface
- 44.1/48kHz and 16-/24-bit recording
- 1/4-inch guitar input
- Balanced XLR input with mic preamplifier
- Gain knobs
- 1/4-inch stereo monitor input
- Two 1/4-inch line inputs
- Two 1/4-inch analog outs
- 1/4-inch stereo headphone out
- USB bus-powered with LED status indicator
- ASIO, WDM and Mac OS X Drivers
- 18 immortal guitar amps (modeled after Fender Deluxe Reverb, Marshall JCM-800, Vox AC-30 Top Boost, Mesa/Boogie Dual Rectifier, and more)
- 24 guitar cabinets
- 5 bass amplifiers
- 5 bass cabinets
- 29 essential stompbox and studio effects (modeled after EP-1 Tube Echoplex, Ibanez Tube Screamer, MXR Phase 90, LA-2A studio compressor, and more)
- 6 microphone preamplifiers (modeled after Neve 1073, Avalon Vt737, API 512c, and more)
- FX Junkie Model Pack with 35 effects models
Behringer Ultra-DI DI20 2-channel Active Direct Box / Splitter
Presto Chango DI Box
The Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter can convert two separate unbalanced 1/4" inputs into two balanced XLR outputs. Need a signal splitter? The DI20 does that too. Whether you're a keyboardist, guitarist, or bassist, you'll marvel at the flexibility this little box gives you. Feed it two mono signals, a stereo signal, or a split signal feeding two separate amps. You also get a groundlift and a 3-position input attenuator to school unruly signals - so you can even connect it to your guitar amp's speaker output! The Behringer Ultra-DI DI20 is cool. Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter Features at a Glance:- Multi-purpose direct injection box for stage and studio applications
- Provides impedance and signal matching for direct connection of instruments to mixers and amplifiers
- Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs
- Additional Split mode (channel 1 assigns signal to both XLR outputs)
- Ultra-flat frequency response due to servo-balanced operation
- Internal battery automatically shuts off when phantom power is applied
- Allows direct connection to speaker outputs with up to 3,000W
- Groundlift switch eliminates typical ground loop problems
- Input 2 usable as channel 1 Link output (additional to XLR output)
- TRS and gold-plated XLR connectors
- Ultra-rugged, road-suitable metal case
- High-quality components and exceptionally rugged construction ensure long life
NUX PDI-1G Guitar DI Box
NUX PDI-1G Guitar Direct Injection Phantom DI Box Instrument To Balanced and Unbalanced Direct Box Audio Mixer Para Out
- 48V Phantom power, convenient power source for active direct box.
- Made of aluminum alloy, convenient and durable.Compact design and metal housing, good durability.
- Transform unbalanced signal into balanced, minimize noise and loss of tone.
- Hi-Z input for for electronic guitar and bass or other instruments.
- Power supply: 48V Phantom power or DC 9V adapter. Rated input level: -20dBu/0dBu/+20dBu.
- Rated input level: -20dBu/0dBu/+20dBu
- Maximum input level: +48dBu
- Frequency response: 10-40KHz(-1dB)
- Dwell noisy: -110dBu
- THD+N: 0.055% 100mVrms
- Product Dimensions : 4.7 x 2 x 3.3 inches
- Weight: 12.8 ounces