Back to Headphone Amplifiers
Behringer Powerplay P2 Personal In-Ear Monitor Amplifier
PKR 24,500
Convenient Active Volume Control for In-ears
The Powerplay P2 is the powered successor to Behringer’s completely passive PM1 personal in-ear monitor amp. The P2 delivers clear audio right to your in-ear monitors with the signal boost of an active amplifier, and it can run up to 12 hours on two AAA batteries (not included). This powerful belt- or strap-worn in-ear amp is specially designed for musicians and performers whose instruments require stationary play. Every part of the P2 is engineered to withstand the rigors of the road, from the smooth rotary volume control to the overbuilt metal enclosure and belt clip. Sweetwater reviewers were impressed with the locking XLR/TRS combo input, which helps keep foot traffic and stage mishaps from disconnecting your monitor source. The Behringer Powerplay P2 uses a standard 3.5mm output jack to drive in-ears, headphones, or earbuds, and it even features an internal switch for selecting mono or stereo use.
- Delivers crystal-clear, amplified audio directly to your in-ear monitors or headphones
- Built for instrumentalists and other performers who primarily play in a stationary position
- Smooth volume control is built to last a lifetime
- Rugged metal housing is engineered for superior durability
- Belt clip keeps the P2 anchored to your belt or strap
- Runs up to 12 hours on 2 AAA batteries (not included)
- 3.5mm output jack supports in-ear monitors, earbuds, and headphones
- Locking XLR input foils stage mishaps
- Stereo/mono source switch (internal)
You may also like…
High Grade Extension Cable for Headphone Amps 6ft
Recommended for connecting your professional headphone amplifier to any audio interface, mixer or any source with TRS 1/4 Headphones output.
Professional High Grade Insulated Cable
2 Meters (6ft)
Features:
– TS connectors with internal strain relief for rugged reliability
– Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
– OFC spiral shield for effective EMI and RFI rejection and flexibility
*These are custom made cables, slight color & design variations are expected
Headphone Amps Stereo Cable 6ft
Recommended for connecting your headphone amplifier to any audio interface, mixer or any source with TRS 1/4 Headphones output.
2 Meters (6ft)
*Colors may vary
Professional Grade TRS Balanced Cable
- Professional Studio Grade Balanced Microphone Cable with Flexible Overall Jacket
- O.F.C. (Oxygen Free Copper)
- Low Noise EMI Shielded Cable for Pure Signal Transparency
- High Grade TRS - TRS Connectors
- Length : Available in 10, 20, 30 & 50ft
- * Connector designs & colors may vary slightly
TRS Balanced Cable
These cables are designed to connect gear with TRS outputs to gear with TRS inputs. It is ideal for use in studio, touring and other live-sound applications.
3 Meters
Features:
– TS connectors with internal strain relief for rugged reliability
– Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
– OFC spiral shield for effective EMI and RFI rejection and flexibility
*These are custom made cables, slight color & design variations are expected
Related products
Alctron H8 8-Channel Headphone Amp
Alctron H8 is an ultra-versatile 8-channel Headphone Amplifier. It has A,B and C 3 sets of balanced stereo signal inputs. Each channel has the selector switch of Mono or Stereo and it has 8 channels headphone output, each channel has the separate volume control which adjusts the level to both headphone and parallel line outputs. Three balanced, line-level input channels with capacity to distribute one input signal to all headphones or group the headphone outputs (depending upon input configuration) for monitoring flexibility. By virtue of the Mono/Stereo selector switches, one headphone can monitor 2 different Mono signal sources, it will meet all kind of monitor requirement. So it is a very useful equipment for stage or studio.
- Connectors: 1/4" socket
- Type: Balanced
- Impedance: 40k Ohm
- Peak input level: +25dB
- Gain control range: +35dB
- Headphone Power Amplifier Outputs Max. output level: 300mW @ 32 Ohms (max 1W @ 32 Ohms)
- Output Impedance: 22 Ohms
- Max gain: +20dB
- Function Control
- Volume: Per Channel, Variable
- Mono/Stereo switch: Per Input Set
- Power Supply AC Requirement: Selectable 100-120VAC, 200 - 240VAC, 50-60Hz
- Distortion: 0.02%
- Frequency response: 20Hz-20kHz
- S/N Ratio > 80dB
- Crosstalk rejection > 68dB @ 1kHz; 20dB Input
Alctron HA-8 Headphone Amplifier
Alctron HA-8 is an active converter, belt-pack for personal monitor application. Its built-in battery helps HA-8 to performance. XLR or 1/4’’ make plugs connection of a personal monitor mix. VOLUME knob adjusts the output level and powers the unit off when turned counterclockwise. The adjacent green LED will lit when the power is on. The MONO/STEREO switch should be set to MONO when used with a mixer’s aux send or any other mono source and set to STEREO when connected to a headphone output or other stereo source.
- Active monitor with volume adjustable knob
- Built-in battery helps HA-8 to performance
- VOLUME knob adjusts the output level
- Adjacent LED will lit when the power is on
- MONO/STEREO two modes adjustable
ART HeadAmp 4 Pro with Talk Back
Four-way headphone amp with smart features.
The HeadAmp4Pro has five stereo headphone outs, each with its own volume control. A separate footswitch-able XLR input (with phantom power) allows instant talkback to any one or all of the connected headphones. Input matrix allows the listener to audition any or all auxiliary inputs for maximum versatility.
Although designed for home and project studio, the HeadAmp4Pro may easily be the ideal solution for teaching stations and conferencing communication networks.- Five stereo headphone amplifiers with independent volume controls
- Built in talkback mic
- Selectable external mic input jack
- Separate aux inputs
- Talkback on one or all outputs
- Listen to any or all aux inputs
- Remote footswitch jack
- Phantom power on external mic input
- Compact rugged package
Order today and simplify your recording workflow.
N-Audio HPA1600 8-Channel Headphones Amplifier
8-Channel Upgraded Headphone Power Amp and Mix Distro
Expand your headphone setup with the N-audio HPA1600 Headphone Mixing/Distribution Amplifier. The HPA1600's main input features two stereo inputs for two independent mixes, which are selectable for all outputs. You can create separate mixes, choose who listens to what, and choose the levels. The HPA1600 features an LED output meter, Main 1 and Main 2 switch, plus a Mono/Stereo switch and level control on each channel. From the back of the headphone amp each channel has an extra headphone output and a direct input for adding instruments and vocals. SPECIFICATION:- 8 independent direct inputs provide up to 8 individual stereo mixes
- 8 total stereo amplifier sections in just one rack space
- Toroidal transformer is noiseless and generates little magnetic interference
- 8-digit LED output meter for each amp section helps to keep clipping under control
- Two stereo main inputs allow you to distribute two discrete mixes
- High-quality components and exceptionally rugged construction at a great price
