Back to Guitar Wireless Systems
Getaria GWS-8 2.4GHZ Wireless Guitar System
PKR 13,500
- Wireless Guitar transmitter receiver set designed for electronic music instruments like guitar, bass, etc.
- 2.4G uncompressed wireless signal transmission, low noise and latency, wireless guitar system effective range is about 30 meters.
- Wireless Guitar Supports 6 sets of devices working at same time, one-to-one and no-interference; and one transmitter can transmit signal to several receivers at the same time also.
- Guitar Wireless Built-in rechargeable lithium battery, long working hours, and comes with USB cable for convenient recharging.
- Getaria Wireless Guitar System 280° rotatable 1/4″ plug, available for instruments with input jack in different positions.
Related products
Price Drop!
Original price was: PKR 16,500.PKR 15,000Current price is: PKR 15,000.
Add to cart
Behringer Ultra-DI DI20 2-channel Active Direct Box / Splitter
Presto Chango DI Box
The Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter can convert two separate unbalanced 1/4" inputs into two balanced XLR outputs. Need a signal splitter? The DI20 does that too. Whether you're a keyboardist, guitarist, or bassist, you'll marvel at the flexibility this little box gives you. Feed it two mono signals, a stereo signal, or a split signal feeding two separate amps. You also get a groundlift and a 3-position input attenuator to school unruly signals - so you can even connect it to your guitar amp's speaker output! The Behringer Ultra-DI DI20 is cool. Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter Features at a Glance:- Multi-purpose direct injection box for stage and studio applications
- Provides impedance and signal matching for direct connection of instruments to mixers and amplifiers
- Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs
- Additional Split mode (channel 1 assigns signal to both XLR outputs)
- Ultra-flat frequency response due to servo-balanced operation
- Internal battery automatically shuts off when phantom power is applied
- Allows direct connection to speaker outputs with up to 3,000W
- Groundlift switch eliminates typical ground loop problems
- Input 2 usable as channel 1 Link output (additional to XLR output)
- TRS and gold-plated XLR connectors
- Ultra-rugged, road-suitable metal case
- High-quality components and exceptionally rugged construction ensure long life
Line 6 POD Studio UX1 Audio Interface
Killer Gear Modeling Plug-in Plus an Interface!
The POD Studio UX1 is a powerful software and hardware recording solution that's designed with guitarists in mind. POD Studio UX1 includes a 3-channel audio interface with one microphone input, one guitar/bass input, and stereo line inputs for gear such as keyboards and drum machines. You also get the POD Farm plug-in, which offers up a dream collection of classic and modern amplifiers, stompboxes, studio effects, and even vocal preamplifiers, so you can achieve virtually any sound imaginable with Line 6's POD Studio UX1!- Powerful and versatile 3-channel USB audio interface
- POD Farm plug-in software with killer models and effects
- Includes 3-channel USB 1.1/2.0 recording interface
- 44.1/48kHz and 16-/24-bit recording
- 1/4-inch guitar input
- Balanced XLR input with mic preamplifier
- Gain knobs
- 1/4-inch stereo monitor input
- Two 1/4-inch line inputs
- Two 1/4-inch analog outs
- 1/4-inch stereo headphone out
- USB bus-powered with LED status indicator
- ASIO, WDM and Mac OS X Drivers
- 18 immortal guitar amps (modeled after Fender Deluxe Reverb, Marshall JCM-800, Vox AC-30 Top Boost, Mesa/Boogie Dual Rectifier, and more)
- 24 guitar cabinets
- 5 bass amplifiers
- 5 bass cabinets
- 29 essential stompbox and studio effects (modeled after EP-1 Tube Echoplex, Ibanez Tube Screamer, MXR Phase 90, LA-2A studio compressor, and more)
- 6 microphone preamplifiers (modeled after Neve 1073, Avalon Vt737, API 512c, and more)
- FX Junkie Model Pack with 35 effects models
Behringer FCB1010 MIDI Foot Controller
Super-flexible MIDI controller.
If you've got a MIDI rig you need to tame, you'll find the Behringer FCB1010 MIDI Footcontroller indispensable. With 10 banks of 10 presets, you'll have plenty of storage space. Each preset can send 5 MIDI program change commands and 2 MIDI control commands simultaneously so you can configure an entire synth rack with one stomp.
2 expression pedals independently control any MIDI channel, controller number, and range. The footswitches can also be configured to send MIDI note numbers, perfect for tap-tempo functions. 2 programmable, relay-controlled footswitch jacks are great for switching guitar amp channels via MIDI.- 10 banks of presets
- 2 expression pedals with freely assignable MIDI channel, controller number, and range
- Simultaneous transmission of five MIDI program change commands and two MIDI control commands per preset
- MIDI note-on commands for trigger and tap-tempo applications
- 2 programmable, relay-controlled switch jacks
Your rig's grown by leaps and bounds, so take a leap and escape your bounds - get the Behringer MIDI footcontroller today.
NUX PDI-1G Guitar DI Box
NUX PDI-1G Guitar Direct Injection Phantom DI Box Instrument To Balanced and Unbalanced Direct Box Audio Mixer Para Out
- 48V Phantom power, convenient power source for active direct box.
- Made of aluminum alloy, convenient and durable.Compact design and metal housing, good durability.
- Transform unbalanced signal into balanced, minimize noise and loss of tone.
- Hi-Z input for for electronic guitar and bass or other instruments.
- Power supply: 48V Phantom power or DC 9V adapter. Rated input level: -20dBu/0dBu/+20dBu.
- Rated input level: -20dBu/0dBu/+20dBu
- Maximum input level: +48dBu
- Frequency response: 10-40KHz(-1dB)
- Dwell noisy: -110dBu
- THD+N: 0.055% 100mVrms
- Product Dimensions : 4.7 x 2 x 3.3 inches
- Weight: 12.8 ounces
