Back to Condenser Microphones
Behringer B-2 PRO Condenser Microphone Pack
PKR 55,000
High-performance, dual-diaphragm design for versatility.
The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included.
Requires phantom power.
- 1″ dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal – 1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
At this price, it’s easy to finally get crystal clear sound for your studio. Order today.
Related products
Made in Australia
RODE Ai-KIT (Mic with Interface Pack)
A Complete Mic + Interface Bundle from RODE
With the RODE NT1 microphone/Ai-1 USB audio interface bundle, you're equipped to capture pristine, low-noise vocals and instrument audio anywhere you go. The RODE NT1 microphone has a present, full-bodied sound that takes vocals and acoustic instruments to the front of a mix without much sweetening. Sporting a mere 4.5dBA of self-noise, the NT1 is far and away one of the quietest mics in its class. Patented Lyre capsule suspension technology from Rycote isolates the NT1 from even the natural harmonic resonance of its aluminum body. This mic is a perfect mate for the included RODE Ai-1 interface, which features a USB-C connection for bus power and easy compatibility with modern laptops. Rounding out the package are the RODE SRM combination shockmount-pop shield, which reduces handling noise and "p" pops as you record, as well as a rugged mic cable.- Includes the RODE NT1 condenser microphone, Ai-1 USB audio interface, SRM combination shockmount/pop shield, and an XLR mic cable
- All you need to start enjoying great recordings at home or on the go
- NT1 microphone is present yet full bodied for an up-front sound without much sweetening
- 4.5dB self-noise — one of the quietest mics in its class
- 137dB SPL handling — stands up to guitar cabs and drums
- Rycote Lyre suspension isolates the capsule from the body
- Ai-1 audio interface is compact and capable
- Accurate mixing and monitoring via balanced 1/4" outs and high-quality onboard headphone amp
- USB-C connection provides bus power and direct compatibility with modern laptops
- Zero-latency monitoring
- +48V phantom power
- Includes the SMR shockmount/pop filter and an XLR cable
Price Drop!
Original price was: PKR 135,000.PKR 120,000Current price is: PKR 120,000.
Add to cart
Made in Australia
RODE NT2-A Studio Solution
A Legend Is Reborn - with Cool Extras!
The Rode NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today's modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50's and 60's. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!- The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
- 3-position variable highpass filter: Flat, 80Hz or 40Hz.
- 3-position variable pad: 0dB, -5dB or -10dB.
- Ultra low noise, transformerless SMT circuitry.
- Wide dynamic range.
- High strength heat-treated steel mesh head.
- Durable satin nickel finish.
- Internal capsule shock mounting.
- Supplied complete with soft pouch and clip.
- Designed and manufactured in Sydney, Australia.
- SM6 Shockmount
- XLR Cable
- Microphone Dust Cover
- Exclusive NT2-A Recording Techniques DVD w/John Merchant
- Requires +48V phantom power
Price Drop!
Original price was: PKR 26,000.PKR 23,000Current price is: PKR 23,000.
Add to cart
Behringer C-1 Studio Condenser Microphone
Medium-diaphragm Condenser Microphone with Cardioid Pickup Pattern, Transformerless FET Input, Phantom Power, and Swivel Stand Mount
Behringer C-3 Dual-Diaphragm Condenser Microphone
Dual-diaphragm Condenser
The Behringer C-3 dual-diaphragm condenser mic is an affordable, high-quality way to put medium-diaphragm condenser mojo in your mic locker. The medium-diaphragm condenser is a studio staple, the mic you reach for when you need to capture a lead vocal or the room sound of a raging guitar cab. The C-3 gives you the big sound, plus the bonus of being able to switch pickup patterns between cardioid, omnidirectional, and figure-eight. This gives you enormous flexibility (and used to cost a fortune) Thankfully, now you have it all - affordably - with Behringer's C-3.- Medium Dual-Diaphragm Studio Condenser Microphone
- Professional medium dual-diaphragm condenser microphone for studio recording and live applications
- Ideal as main and support microphone for studio and live applications
- Selectable cardioid, omnidirectional and figure-eight pickup pattern
- Pressure-gradient transducer with shock-mounted dual-diaphragm capsule
- Perfect for acoustic instruments, overhead, piano, etc.
- Exceptionally flat frequency response and ultra-high sound resolution
- Ultra low-noise transformerless FET input eliminates low-frequency distortion
- Rugged construction with metal die-cast body
- Gold-plated 3-pin XLR connector for highest signal integrity
- Swivel stand mount and transport case included
- High-quality components and exceptionally rugged construction ensure long life
- Requires +48V phantom power