Accessories

Showing all 8 results

Mic Stand Tabletop Goose-neck
Mic Stand Tabletop Goose-neck Mic Holder Clip Included High Quality Heavy Die-Cast Iron Base
PKR 1,800 Add to cart
Mic Stand Tabletop
Mic Stand Tabletop with Mic Holder Clip
PKR 1,800 Add to cart
Flanger Notation/Music Stand
Flanger foldable notation/notes stand, foldable with carrying bag.
PKR 3,000 OUT OF STOCK
Behringer CT100 6-in-1 Cable Tester

Check Your Cables!

Make sure your gear is ready to go with the Behringer Cable Tester CT100. Bad cables can instantly ruin your gig or session. The CT100 cable tester is the perfect, and inexpensive, way to find bad cables fast. This compact unit tests the most common audio cables including XLR, TRS, MIDI, and more. You even get to choose from three testing modes. We that keeping your studio or live rig running in top shape is important to you, and we're confident that the Behringer Cable Tester CT100 can help make that a reality. Behringer Cable Tester CT100 Features:
  • Easy-to-use cable tester for common audio cables
  • Tests XLR, 1/4" TRS, 1/8" TRS, TT TRS, RCA, and MIDI cables
  • Microprocessor-controlled modes include Cable Test, Installed Cable Test, and Tone
  • Runs on 2 AA batteries
  • Includes belt clip for busy roadies and techs
  • Performs continuity check, intermittent contact check, phantom power, and ground shield check
Test your cables quickly and accurately with the Behringer Cable Tester CT100!
PKR 8,500 Add to cart
Behringer CT200 8-in-1 Cable Tester

Take the Guesswork Out of Cable Testing

Behringer's CT200 cable tester is an absolute must-have in your studio or live-sound toolbox. This super-affordable 8-in-1 cable tester lets you diagnose common problems in a wide range of cable types. On the audio side, the CT200 lets you check for faults and shorts in cables with XLR, speakON, 1/4" and 1/8" TRS, and RCA connectors. Our techs also appreciate the way it lets you quickly sort out issues with RJ45 Ethernet cables, MIDI cables, and USB cables. What's more, it even works on installed cables, and an onboard test tone lets you quickly check if signal is passing through clearly. Behringer CT200 Cable Tester Features:
  • A quality cable tester for your studio or live toolbox
  • Checks XLR, speakON, 1/4" and 1/8" TRS, and RCA audio cables
  • Includes phantom power and ground shield diagnosis
  • Tests RJ45 (Ethernet), MIDI, and USB data cables for continuity
  • Intuitive LED display makes operation easy
  • Test-tone generator for 1kHz or 440Hz at +4dBu, -10dBV or -50dBV
  • Tests loose cables and installed cables
  • Runs on just 2 AA batteries
Note: This unit works with TS cables, but will show a Pin 1-3 short, due to TS cables not having a pin 3 ring.
PKR 12,500 Add to cart
Behringer Ultra-G GI100 DI-Box

An active DI Box for guitar with fantastic speaker simulation.

The Behringer Ultra-G GI100 DI Box features a switchable speaker simulation that so realistically emulates a 4x12 cab you may never mic your speakers again. Features include switchable input attenuation allowing levels of up to +48dBu, a ground lift switch to eliminate loop problems, and a rugged roadproof aluminum case. An internal battery automatically shuts off when phantom power is connected.

  • Realistically emulates a 4x12 cab
  • Switchable input attenuation allowing levels of up to +48dBu
  • Ground-lift switch to eliminate loop problems
  • Rugged roadproof aluminum case
PKR 17,000 Add to cart
Mackie Thump GO Spare Battery

Backup or Replacement Battery for Your Thump GO

If you're needing to replace an older battery or you are just looking to stash a backup, then Mackie recommends this rechargeable lithium-ion battery pack for your Mackie Thump GO 8-inch Portable Loudspeaker. With up to 12 hours of battery life on a single charge, this loudspeaker battery is the perfectly reliable choice for extended playback time no matter where you take your Thump GO, whether streaming inside via Bluetooth or using it as an outdoor PA. Refer to your Thump GO's tri-color battery life indicator to give you an up-to-speed idea of just how much life is left before you need to recharge. Also included with your battery pack is a Quick Start Guide to make your battery swap and speaker setup easy.
  • Lithium-ion battery pack compatible with Mackie Thump GO 8-inch Portable Loudspeaker
  • Can be used to replace an older battery or as a charged backup for added playback reliability
  • Up to 12 hours of battery life, remaining charge will be displayed on your Mackie Thump GO
  • Includes a quick start guide for easy swapping and setup
PKR 20,000 Add to cart
Behringer DEQ1024 Ultragraph Digital EQ

Eats feedback-causing frequencies and leaves you with clean, balanced sound.

The Behringer DEQ1024 Ultragraph Digital EQ combines digital stereo operation and a powerful 31-band EQ with incredibly simple and effective feedback fighting. The FBQ Feedback Detection System responds quickly, utilizing LEDs in the 45mm faders to indicate the offending frequency. 24/48-bit Motorola DSP and high-resolution 24-bit/96kHz A/D/A converters deliver fantastic sonic resolution. The EQ features operating ranges of ±12dB, ±6dB, and 0/-24dB; 31 illuminated faders; True Curve/WYSIWYG function; sweepable low- and high-cut filters; a noise gate/peak limiter; and pink noise generator. Servo-balanced I/O with gold-plated XLR and 1/4" TRS connectors, plus digital AES/EBU and S/PDIF with 44.1, 48, and 96kHz sample rates. Switchable international power supply.

  • 31-band EQ
  • FBQ Feedback Detection System
  • Digital stereo operation
  • 45mm LED-illuminated faders
  • 24/48-bit Motorola DSP
  • 24-bit/96kHz A/D/A converters
  • EQ operating range of ±12dB, ±6dB, or 0/-24dB
  • True Curve/WYSIWYG function
  • Sweepable low- and high-cut filters
  • Noise gate/peak limiter
  • Pink noise generator
  • Servo-balanced I/O
  • Gold-plated XLR and 1/4" TRS connectors
  • Digital AES/EBU and S/PDIF I/O with 44.1, 48, and 96kHz sample rates
PKR 48,000 Add to cart