Back to Effects Pedals
NUX PT-6 Pedal Tuner with True Bypass
PKR 10,000
Very sensitive chromatic tuning mode with a wide range.
Bright LED screen allows a clear visibility both on stage and outdoors. True Bypass Circuit allows tuning without any signal loss or latency. If signal is lost after 5 minutes, power save function will shut the pedal off automatically.
Category: Effects Pedals
Related products
NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.NUX CH-3 Vintage Chorus Pedal
Unpressed music is like a fly in the ointment. This chorus effect pedal with 3 adjustable knobs including depth, blend, and speed knob will compensate for the pity. Designed with true bypass , it will minimize tone loss. It is a good guitar accessory which brings you a musical feast.
- High quality effect with flexible function.
- Adopted low noise BBD in delay circuit, natural and clear sound.
- True bypass design, minimizes tone loss and get more control of your pedal.
- LED indicator shows status of effect and battery condition.
- The pedal can be powered by a battery or AC adapter.
Boss MT-2 Metal Zone Distortion Pedal
Made for Heavy Metal Rockin'
The BOSS MT-2 Metal Zone distortion pedal is one of most popular pedals - with good reason! Its unique dual-gain circuitry provides you with distortion tones that sound positively huge. You get insane levels of saturation, super-long sustain, and heavy mids and lows that are reminiscent of a stack of overdriven amps. On top of that, its 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options, giving you command over a wide range of over-the-top distortion textures. Make no mistake - if you're a hard rock or metal guitarist, then the BOSS MT-2 Metal Zone distortion pedal should be an integral part of your tonal assault. BOSS MT-2 Metal Zone Distortion Pedal Features at a Glance:- Unique dual-gain circuitry creates incredible-sounding distortion
- Provides super-long sustain and heavy mids and lows like a stack of overdriven amps
- 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options
- Tailor-made for hard rock and metal guitarists
NUX Metal Core Distortion Pedal
Nux Metal Core Pedal Effect
The Nux Cherub Metal Core Guitar Effects Pedal is a guitar effects pedal with 2 types of metallic sounds and a built-in 2-Band EQ. This metal core features in tone lock function which will ensure the preset will not be changed during performance by disabling the button function. True bypass design minimizes loss of tone.
Diagram
- Power in
- Gas knob : Metal gain control
- Bass knob : Adjust the bass of the metal
- Out jack: Connect the core to the guitar amp
- On / Off toggle
- Variable tone lock & toggle switch: Select Voice 1 or Voice 2; freeze the current by switching it to the middle position
- Lever class : Metal level control
- Treble knob : Treble metal
- LED Indicator : Shows effect status - On / Off
- Input jack : Connect the core to the guitar
- Presets : 1 storable user presets
- Sampling frequency : 44.1 kHz
- Digital A / D : 24-bit
- Signal processing : 32-bit
- Frequency Response : 20Hz-20000Hz ± 1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic Range: 100dB
- Input : -20dBV
- Output : -10dBV (10k output load impedance Or more)
- Power : 9V DC (9V Battery or ACD-007A Adapter) (not included)