Shop
Showing 481–520 of 3399 results
Made in Germany
Beyerdynamic DT880 PRO (250 ohm Semi Open)
Semi-Open Circumaural Studio Headphones with 5Hz-35kHz Response, and Padded Headband
Beyerdynamic Fox USB Condenser Microphone
Large-diaphragm Cardioid USB Condenser Microphone with 24-bit/96kHz Sound, Mute Button, Gain Switch, Mix and Volume Controls, and Headphone Output - Mac/PC/iOS/Android
USED!
Blue Microphones The Original Baby Bottle Pack
The Original Baby Bottle
The Baby Bottle is a pressure-gradient cardioid condenser microphone, employing an edge-terminated single-membrane large-diaphragm capsule. The diaphragm is a 6-micron mylar film, sputtered with a mixture of gold and aluminum. It is enclosed in a spherical grille with a side-address design. The mic’s electronics are Class A discrete, with transformerless output. The mic’s self-noise rating, 5.5 dB(A), is among the lowest we’ve seen. The Baby Bottle has won Electronic Musician’s Editor’s Choice Award Blue Baby Bottle with Accessories- Universal Shock Mount
- Original Pop Filter
- Premium Quality Wooden Case
- Original Box Packing
- Available in Used
- Original products pictures are attached in Gallery
- All used products are 100% tested before listing, at store checking available
- All used products are covered under 7-days warranty.
Bongo Drums
Great-sounding, Eco Friendly Bongos
- 1 pair of 8-inch and 7-inch bongos
- Quality Asian Oak construction
- Natural rawhide heads
- Black powder coated construction
- 8 tuning lugs
- Responsibly sourced and environmentally friendly
Bongo Drums Stand
High Grade Steel Construction with Anti-Rust Coated Hardware.
Boom Arm Stand Heavy Duty
- High Grade Boom Arm Stand
- Table Clamp
- Springless Design with Internal Stepper Mount
- Built in cable routing
- Length: Approx. 90 cm
- Standard thread adapters 3/8 & 5/8 for universal compatibility with mic holders & shock mounts
Boom Scissor Arm Stand L28
Recommended for Lightweight Condenser or Standard Dynamic Microphones
Arm length: 15x15 Inches approx.
- Adjustable Microphone Boom Arm Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more
- Stable Arm Support With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a dynamic or condenser microphone. And the springs don’t get in the way of tightening the adjustment knob
- Desk Mounting Clamp The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm
- Screw Adapter & Mic Clip : Universal compatible mounting
- Solid Base The base connector is solid for durable and reliable holding
Boom Scissor Arm Stand L38
Recommended for Condenser or Podcast Mics
Arm length: 20x20 Inches approx.
- Adjustable Microphone Boom Arm Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more
- Stable Arm Support With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a dynamic or condenser microphone. And the springs don’t get in the way of tightening the adjustment knob
- Desk Mounting Clamp The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm
- Screw Adapter & Mic Clip : Universal compatible mounting
- Solid Base The base connector is solid for durable and reliable holding
Boss SD-1 SUPER OverDrive
Precise control; ultra-rich harmonics!
The Boss SUPER OverDrive SD-1 gives you the warm, smooth distortion of an overdriven tube amp without blurring the nuances of your picking technique. The unique symmetric drive circuit delivers a more rich, authentic-sounding overdrive effect. Here's an overdrive pedal that has Level, Drive, and Tone controls that make it easy to go from mild to hard, or even use the SD-1 as a signal booster.
- Warm, smooth distortion
- Unique symmetrical gain circuit
Dial in a 'drive sound all your own. Order now.
Boss CH-1 Stereo Super Chorus
Chorus Effects Pedal for Guitar and Keyboard with Stereo Outputs, and Effect Level, EQ, Rate, and Depth Controls
Boss DD-3T Digital Delay
Digital Delay Pedal with Tap Tempo, 12.5ms-800ms Delay Time, Short Loop (Hold) Function, and Wet/Dry Outputs
Boss DD-8 Digital Delay
Delay Guitar Effect Pedal with 10 Seconds of Delay, 11 Delay Modes, 40-second Looper with Overdub, Tap Tempo, Carryover Switch, Twist Function, True Stereo I/O with 3 Output Modes, Smart I/O, and 2 Footswitch Inputs
Boss DS-1 Distortion Pedal
Distortion Effects Pedal for Guitar, Bass, and Keyboard with Distortion, Level, and Tone Controls
Boss GX-10 Guitar/Bass Effects Processor
Guitar/Bass Multi-effects Pedal with Amp/Effects Modeling, Cabs, Mics, LCD, Expression Pedal, MIDI, Effects Loop, and USB-C Recording Interface
Boss Katana-50 EX Gen 3
50/25/0.5W, 1×12″ Guitar Combo Amp with 12 Amp Voicings, 5 Simultaneous Effects, Line Out, Stereo Expand, Headphone Output, and USB
Boss MD-2 Mega Distortion Pedal
There's a Reason They Called It the "Mega Distortion" Pedal
Every guitarist here at Sweetwater who's come in contact with the MD-2 has been blown away. Some go so far as to say it's BOSS's best distortion pedal ever. We know that's a bold statement, but just wait until you hear it! It delivers distortion so nasty, gnarly, and just plain vicious that it'll leave permanent psychological scars.- Gain boost circuit creates huge distortion and sustain regardless of level
- New Bottom control for bottom-heavy distortion matched to 7-string guitars
- Tone control adjusts balance between high and low frequencies
Boss ME-8 Guitar Multi-Effects Processor (Used)
Guitar Multi-Effects Processor
- Available in Used
- Original products pictures are attached in Gallery
- Processor with Power Supply only
- All used products are 100% tested before listing, at store checking available
- All used products are covered under 7-days warranty.
Boss MT-2 Metal Zone Distortion Pedal
Made for Heavy Metal Rockin'
The BOSS MT-2 Metal Zone distortion pedal is one of most popular pedals - with good reason! Its unique dual-gain circuitry provides you with distortion tones that sound positively huge. You get insane levels of saturation, super-long sustain, and heavy mids and lows that are reminiscent of a stack of overdriven amps. On top of that, its 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options, giving you command over a wide range of over-the-top distortion textures. Make no mistake - if you're a hard rock or metal guitarist, then the BOSS MT-2 Metal Zone distortion pedal should be an integral part of your tonal assault. BOSS MT-2 Metal Zone Distortion Pedal Features at a Glance:- Unique dual-gain circuitry creates incredible-sounding distortion
- Provides super-long sustain and heavy mids and lows like a stack of overdriven amps
- 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options
- Tailor-made for hard rock and metal guitarists
Boss NS-2 Noise Suppressor Pedal
Smoother and "More Natural" Than Your Regular Noise Gate!
The NS-2 effectively eliminates noise and hum of the input signal while preserving the original sound's tonality. The natural attack and envelope are unaffected thanks to the NS-2's unique noise detection circuit that precisely separates the guitar sound and the noise components. BOSS NS-2 Features:- Compact noise suppression pedal for eliminating noise and hum in guitar and bass effects and amplifier setups
- Unique noise detection circuit preserves the natural attack and envelope of an instrument's sound
- Threshold and decay knobs allow for shaping the elimination/suppression as desired
Boss PSA-230 Power Supply for Boss Compact Pedals
Boss PSA230 Power Supply
The only Boss recommended pedal to power your Boss effects. Can be used in conjunction with the Boss TU-2 Tuner and Boss daisy chain lead to power up to 5 of your Boss pedals.N.B. This product was previously known as PSA 240. If you are looking for a PSA240 to power a Boss effects pedal - this PSA230 is what you're after - they are exactly the same specification!
Specifications- Input: 230v - 50Hz
- Output: 9v - 500mA
- Center negative 9v power supply suitable for all Boss compact pedals and many other Guitar and Bass effects. Made by the Kings of Guitar FX - Roland Boss.
- Boss PSA230ES now includes a built in output current protection circuit!
Boss RC-1 Loop Station
Stereo Looping Pedal with Footswitch and Stompbox Operation and Level Control
Boss RC-5 Loop Station
13-hour Stereo Looper Pedal with Color LCD, MIDI I/O, USB Import/Export, and Onboard Rhythm Tracks
Boss TU-01 Clip-On Chromatic Tuner
Ideal for guitar, bass, and ukulele, the clip-on TU-01 is the most affordable tuner in the trusted BOSS lineup. Small, durable, and simple to use, it provides convenient, reliable tuning right on your instrument's headstock. A bright, attractive display features a cool digital meter and note indicator, plus two lights that show when you're perfectly in tune. The TU-01 also adjusts for different viewing angles and folds down for easy transport in your case or gig bag.
Features:
- Renowned BOSS tuning quality in an affordable clip-on tuner
- Features Chromatic, Guitar, Bass, and Ukulele tuning modes
- Convenient reference pitch function (A=440 Hz)
- Runs for up to 25 continuous hours with a CR2032 lithium battery
- Auto off function to preserve battery life when the tuner is not in use
3-Years Warranty
BOYA Boyalink All in One Wireless Microphone
All in One Smart Wireless Solution
Boyalink is a wireless microphone system with dual 2.4G channels. Equipped with the USB-C, Lightning, and 3.5mm TRS connectors, Boyalink is the ultimate solution for content creators who demand high-quality audio recording without the hassle of multiple connectors or adapters. Its all-in-one storage design, dual-channel wireless technology, and easy-to-use setup make it the ideal choice for anyone looking to take their audio recording to the next level.- All-In-One Storage, Fits All Scenarios
- Ultra-Long Battery Life
- Ready for Use Right Out of the Case
- One Step to Open the Noise Reduction Function
- Sound Like a Professional
- Charge Your Device While in Use
- Customize the Sound You Want
- Dual-Channel Recording
- Automatically Frequency-Hopping Technology, Powerful Anti-Interference
- User-Friendly Buckle Design
BOYA BY-M1000 Pro Condenser Microphone Pack
Complete Pack of Large Diaphragm Condenser Microphone with Pop-filter, Shock mount & XLR Cable
3 Years Warranty
BOYA BY-PM500 USB-C Condenser Microphone
USB-C Condenser Microphone, compatible with Windows, Mac and most Type-C smart phones & devices
3 Years Warranty
Boyong A1 Dual Microphone T-Bar Mount
Boyong A1 Dual Microphone T-Bar Mount with 5/8"-27 Threads & Two Microphone Clips
Convert any standard microphone stand to hold two microphones.
Boyong BY-21 Table Mic Stand with Clamp
Heavy Duty Gooseneck Adjustable Microphone Stand – with Table Clamp
Boyong BY-38/39 Arm Scissor Microphone Stand
High Quality SS Material
Available in Black (39) & Silver(38) color
Boyong BY-520 Music Notation Stand
Boyong BY-520 Music/Notation Stand
H：750～1200mm W：3.6 kg
Boyong BY702 Sound or DJ Mixer Stand
This DJ Mixer or Sound Mixer rackmount stand contains a built-in 19 single space outboard gear rack, perfect for storing outboard gear, amplifiers, or signal processors
Boyong BY789 Stage Microphone Stand
Heavy Duty Stage Microphone Stand – One Hand Mic Stand
Recommended for Dynamic Microphones
Boyong BY801 Heavy Duty Speaker Stands
The tripod speaker stand features a center steel shaft for maximum support and an metal body. Locking pins are included for extra safety.
- Inside tube :φ35*950mm
- Outside tube :φ42*870mm
- Foot tube :φ35*720mm
- Height:1000-1880mm
- Weight:4.05kg
- Capacity Weight：60kg
- Iron tube with aluminum joint
Boyong BY808 Heavy Duty Speaker Stands
The tripod speaker stand features a center steel shaft for maximum support and an metal body. Locking pins are included for extra safety. Easy Hand Crank Handle for height adjustment.
- One hand Adjustable Speaker stand
- Height:1300-2100mm
- Weight:4.7kg (each)
- Capacity Weight：60kg (each)
Braided Guitar Cable High Quality 10ft
- Standard phono guitar cable with high quality braiding all over cable
- Cable length 10ft (3 meters)
- Available in various color finish
Bridge Pin
- High Quality ABS Bridge Pins
- Available in Black/White, Doted/non-Dated
Bridge Pins for Acoustic Guitar – Bone
Bridge Pins for Acoustic Guitar (OX Bone) Pack of 6