Back to Effects Pedals
View cart “NUX Phaser Core” has been added to your cart.
Tomsline ADL-3 Mini Delay
PKR 9,500
- Mini in size, fit in the hand of the adult or just put it into pocket.
- Light-weight and portable, easy to carry along.
- Allows wide range of delay time from 50ms to 400ms.
- True bypass design, minimize tone loss and get more control of your pedal.
- 3 adjustable knobs: Time, Feedback, Level. Powered by a 9V power adapter
Category: Effects Pedals
Related products
Boss DD-3 Digital Delay Pedal
Crystal Clear Stereo Digital Delay and Echo!
The BOSS DD-3 Digital Delay pedal makes it easy to add amazing delay effects to your guitar rig - and it's sized just right for any pedalboard! Housed in a rugged metal enclosure, the compact DD-3 Digital Delay provides rackmount-quality sound with three different settings for a range of effects. You can go from chorus-y shimmer to 800ms atmospheric repeats almost instantly, and a hold function lets you repeat a delay indefinitely while you play over it. You can use its additional direct output to play through a second amp for a true stereo delay setup, too. Plug into a time-tested pedal - get great textures and effects with the DD-3 Digital Delay! BOSS DD-3 Digital Delay Guitar Effect Pedal Features:- High-quality sound
- Three delay time modes from 12.5ms to 800ms
- Hold function repeats sound indefinitely
- Compact and tough metal housing
- Clearly marked, easy-to-use controls
NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design
NUX DS-3 Distortion
Absolutely Distorted!
NUX DS3 is an analog distortion pedal perfect for classic rock and heavy blues. Analog circuits boost your signals and make more harmonics and strong overdrive. It is possible to create good balanced sounds using gain knob and wide-ranged tone knob.- Vintage brown sound, warm but wild, if you like Eddie Van Halen, get it !
- Level, Gain and Tone knob help you adjust your favorate tone easily
- High gain and large adjustability rang, suit for various music styles
- 9V DC power supply adapter ( negtive inside ,not included) or battery
- Material of housing: Aluminum alloy
- Effect types: 12 modulation model
- Presets: Up to 9 storable user presets plus manual mode
- Sampling frequency: 44.1 kHz
- A/D converter: 24-bit
- Signal processing: 32-bit
- Frequency response: 20Hz-20kHz ¡À1dB
- THD+N: 93dBu (<0.003%) A-Weighting
- Dynamic range: 100dB
- Input: -20dBV@1M?
- Output: -10dBV (output load impedance of
- 10k Ohms or more
- Display: 128*128 QVGA TFT
- Power: 9V DC (9V battery, DC adapter (Optional)
NUX Time Force Multi Digital Delay
A total of 11 delay models including tape, analog, reverse and more, provide best tone of full direction. Either instrument input or loop jacks of guitar amp can be connected to TIME FORCE with -10dB or +4dB input/out put, and kill dry functions. Flexible I/O jacks detect the stereo and mono connections automatically, which enable more routing possibilities. 40 seconds in stereo loop station make the practice full of fun. Tail function makes effect sound fade out when the effect is off. Tap tempo with different sub division can input the delay time easily
Effects types 11 modeling delay modes
Presets up to 9 storable user presets plus manual mode
Sampling frequency 44.1 kHz
A/D converter 24-bit
Signal processing 32-bit
Frequency response 20Hz-2000Hz ±1dB
THD+N 93dBu (<0.003%) A-Weighting
Dynamic Range 100dB
Input -20dBV@1MΩ
Output -10dBV(Output load impedance of 10 KΩor more)
Display 128*128 TFT
Power 9V DC (9V battery or optional ACD-007A Adaptor)
Dimension 125(L) * 108(W) * 57(H) mm
Weight 390 g