Back to Guitar Multi Effects

NUX PG-2 Portable Guitar Effects

PKR 8,500

Portable Guitar Effects Processor

  1. Two tuning modes (Chromatic, Guitar), flat tuning function
  2. Built-in metronome with selectable rhythm patterns
  3. 9 user and 9 preset programs
  4. AUX IN makes it easy to jam along with an external music-playback device (mp3 player, etc.)
  5. Three bass preamp: CLEAN, BLUES and ROCK
  6. Three variable speed modulation effects: CHORUS, FLANGER and TREMOLO
  7. More than 800ms DELAY, ROOM and SPRING REVERB
  8. Noise Gate
  9. Backlit LCD screen for tuner and metronome
  10. Two AA batteries provide more than 8 hours

Out of Stock

Category:

Related products

MOOER GE300 Multi-Effects Processor
The GE300 from MOOER is the flagship multi-effect instrument processor. By combining the well-received Micro Preamp series, TONE CAPTURE instrument matching technology, tri-voice polyphonic synthesizer module, and a wide-range of guitar effects and tools, the GE300 embellishes every single motive for creation from your mind with nuanced details. The GE300 contains dual-DSP processors delivering the fastidious detailed characterizes of every delay, reverb, modulation or amp model inside. Thanks to the intuitive and simple UI, controls, and connection ports, the GE300 is an all-in-one working station for musicians whether in a live situation, at home, or in the studio. With the synth module, your instrument will be transformed into an electronic synthesizer without the need for special pickups or instrument modifications, allowing you to spark your creativity with more possibilities. As you can see from the diagram, the SYNTH ENGINE has 3 independent voices with their own parameters for waveform, pitch, attack, level, filter and arpeggiator. The signal path from the instrument input is split and routed directly to the front of each synth voice so they remain completely parallel and independent from one another. The thru dry signal can also be mixed parallel to the entire synth effect block, so you can opt for synth only or mix it with your guitar signal. TONE CAPTURE is an intelligent learning and comparison engine that can be used to create your very own digital models by sampling real-life equipment. The GE300 is the only MOOER product that features three different TONE CAPTURE modes.
PKR 175,000 Add to cart
Behringer V-AMP 3
Next-Generation virtual guitar amplifier with USB audio interface and energyXT2.5 recording software.

If a lack of money and floor space is all that's been standing between you and a home recording studio full of the finest vintage guitar amps and effects pedals, get ready to love the Behringer V-Amp 3 multi-effects processor. This red rocker comes loaded with 32 amp models, 15 speaker cabinet models and 16 classic effects. But that's only the beginning— you also get the UCA222 USB audio interface and free energyXT2.5 Compact recording software.

  • 4 all-new plus 28 improved amp models multiplied by 15 speaker cabinet simulations give you a total of 480 virtual combos
  • USB audio interface included, featuring stereo I/O, optical S/PDIF out, direct monitoring and separate control for phones out
  • No-latency guitar recording on your PC—edit and monitor your sound directly on V-AMP 3 and record to the incredible multi-platform music production software energyXT2.5 Compact BEHRINGER Edition
  • Studio quality multi-effects including reverb, chorus, flanger, phaser, rotary, auto-wah, echo, delay, compressor and various effects combinations
  • 125 memory locations pre-arranged for many popular styles and embedded in the acclaimed intuitive V-AMP user interface
  • Tap-tempo function and many other parameters directly accessible on the unit
  • Presence control adjusts a high-frequency filter, simulating the negative feedback of tube amps
  • Preamp bypass function allows use as a stereo effects processor without amp modeling
  • Stereo Aux input lets you play along to a cue from your PC, CD, MP3 or drum computer for practice, teaching and home-recording applications
  • Balanced stereo Line output can be configured for many recording and live applications
  • Adjustable auto-chromatic tuner plus effective global configurations and equalization easily adopts the V-AMP 3 to any situation outside your home studio
  • MIDI implementation includes program changes, control changes and SysEx, allowing complete MIDI remote control or automation with your energyXT2.5 or any other DAW
  • High-quality components and exceptionally rugged construction ensure long life
The V-Amp 3 guitar effect processor gives you the power to start recording a molten magnum opus in no time!
PKR 32,000 Add to cart
NUX MG-200 Multi-Effects Processor
MG-200 is the floor guitar processor with the new generation of 32-bit DSP high performance 24Bit 44.1kHz AD/DA converter and True Simulation of Analog Circuits (TSAC) technology. MG-200 is based on the popular NUX MG-100 and it has its own unique features! Players who just want a convenient compact multi-effects pedal with good tone will immediately like the new designed CTRL pedal that can switch effects on/off, boost volume for solo, and set tempo for modulation and delay! The extensional pedal jack allows you to plug in an expression pedal or group switching pedal for more control! You can even put the MG-200 on your pedal board to be in the chain with your favorite pedals!
  • A total of 55 models; Up to 8 can be used simultaneously.
  • 13 classic amp models with true simulation of analog circuit(TSAC)technology.
  • Vintage 3-band passive EQ modeling for every amp model.
  • 6-band graphic EQ designed specifically for electric guitar. (100Hz,200Hz,400Hz,800Hz,1.6kHz,3.2kHz)
  • 12 cabinet models provided.
  • The time of presets switching is seamless and quick.
  • Built-in drum machine with CD quality PCM sounds.
  • 56 drum patterns including rock, pop, funk, jazz etc, and metronome.
  • Up to 70 seconds phrase loop with sound on soundadds more playability.
  • Loop sound can be played with drum machine's rhythm beat synchronously.
  • The AUX IN jack makes it easy to practice alone with MP3, CDs and other inputs.
  • Large color TFT LCD panel (160x128), graphic interface making the overall operation easy and intuitive.
  • A total of 72 presets, 36 factory+36 user presets.
  • New generation 32-bit DSP, high performance 24Bit 44.1kHz AD/DA converter.
  • Runs on batteries and AC adaptor. Six AA/LR6 alkaline batteries can be continuous used for 8 hours.
PKR 37,000 OUT OF STOCK
Price Drop!
Zoom MS-70CDR MultiStomp Chorus / Delay / Reverb Pedal

Tons of Effects in a Single Pedal!

The Zoom MS-70CDR MultiStomp chorus/delay/reverb pedal houses a virtual library of effects processors and pedals in the size of a single stompbox-sized pedal. Choose from 86 modeled effects to create your ideal signal chain. A large LCD screen makes the MS-70CDR easy to use in any lighting condition. Right out of the box, this Zoom processor has 30 presets of gig-ready classic effects and 50 user presets, so you can design and save your own sounds. From rock to country to metal, the MS-70CDR is ready for any gig. Free up some space on your pedalboard with the power of the Zoom MS-70CDR MultiStomp chorus/reverb/delay pedal. Amazing models of classic effects With the combination of up to six stompbox and rack effects, the Zoom MS-70CDR MultiStomp chorus/reverb/delay pedal is ready to dish out the sounds you need at your next gig. Classic effects include chorus, reverb, delay, flanger, vibrato, tremolo, and more. You can use up to six effects simultaneously to create big, lush sounds. Create a fat rockabilly slap-back echo or a cavernous delay, whatever you need the Zoom MS-70CDR MultiStomp can deliver. Intuitive interface makes managing your effects chain easy The Zoom MS-70CDR MultiStomp chorus/reverb/delay effects pedal sports a user-friendly graphical interface, featuring a large LCD display and analog-style cursor keys/parameter knobs. With the MS-70CDR, creating, saving, and rearranging your effects chain (both live and the studio) has never been easier. Large LCD screen makes operation easy The Zoom MS-70CDR MultiStomp effects pedal has a large LCD display built-in, so you can instantly see your settings. You'll love being able to see exactly what your preset's settings are with this big, backlit display. There's nothing worse than having to guess how your knobs are set and messing everything up at a show. Three parameter controls let you tweak settings quickly. A set of cursors built-in around the footswitch let you dig deeper into presets and functions on the Zoom MS-70CDR MultiStomp chorus/reverb/delay pedal.
  • Compact multi-effects processor
  • 86 stompbox effects
  • Effects include chorus, reverb, delay, tremolo, flanger, and more
  • Large LCD screen
  • 30 preset patches and 50 used patches
  • Stereo in and out
  • Great for guitar, keyboard, bass, pedal steel, and more
  • Built-in chromatic tuner
Original price was: PKR 50,000.Current price is: PKR 42,000. Add to cart