Back to Guitar Gear Equipment
“NUX Mod Core Deluxe Modulation Effects Pedal” has been added to your cart. View cart
Guitar Multi Pedals Power Supply (for 4 Pedals)
PKR 3,500
- ITE Switching Power Supply (High Grade EU Standard)
- 9V DC 2000 mA (Center Negative)
- Supports up to 8X Effect Pedals Simultaneous
- 4X Power Splitter Cable Included
Categories: Effects Pedals, Guitar Gear, Guitar Gear Equipment
Tag: power supply
Related products

NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.
NUX JTC Drum & Loop
After we released the Nux Mini Core pedals and hit the market, we were asked to "please add a loop pedal into this line". So . . . ask and ye shall receive!
With the NUX JTC Drum & Loop Mini, you can choose from 11 built-in drum rhythms, and record up to 6 minutes in 24-bit high-resolutionaudio quality.
Muti-Function Footswitch
- PRESS ONCE: Record/Play/Overdub Loop.
- ( While playing loop) PRESS & HOLD: Undo/Redo the last layer.
- DOUBLE-PRESS: Stop
- PRESS & HOLD: Clear Loop.
- ( Without loop ) PRESS & HOLD for 1.5 sec to play Drum only.
- When the Drum is playing, HOLD for 1.5 seconds to Stop the Drum OR just press once to Record Loop.
- ( While Drum is playing without Loop ), you can SMART TAP TEMPO to control the speed.
- * Smallest 24 bits loop pedal with drum machine.
- * 11 Drum patterns in different music styles and Metronome.
- * Up to 6 minutes recording, unlimited overdubs.
- * Smart Tap Tempo drum machine.
- * Drum and Loop volumes can be adjusted separately separately
- * Hold the footswitch to use only drum function and control the speed with the footswitch.
- * True-bypass and analog dry-through.

NUX Phaser Core
Depths of Phaser Lots of famous guitarists are remembered with their guitar tones with phaser The effect has been used for rock, pop, jazz, funk and even metal music
Phaser Core's user friendly and simple controllers and 2 types of phaser modes made this famous equipment an all-time-favorite for professional artists and hobbyists. Its versatile 4 or 8 stage phaser circuit design allows a wide variety of sounds with an affordable price.

NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design


