Back to Headphone Amplifiers
Alctron H8 8-Channel Headphone Amp
PKR 38,000
Alctron H8 is an ultra-versatile 8-channel Headphone Amplifier. It has A,B and C 3 sets of balanced stereo signal inputs. Each channel has the selector switch of Mono or Stereo and it has 8 channels headphone output, each channel has the separate volume control which adjusts the level to both headphone and parallel line outputs. Three balanced, line-level input channels with capacity to distribute one input signal to all headphones or group the headphone outputs (depending upon input configuration) for monitoring flexibility. By virtue of the Mono/Stereo selector switches, one headphone can monitor 2 different Mono signal sources, it will meet all kind of monitor requirement. So it is a very useful equipment for stage or studio.
- Connectors: 1/4″ socket
- Type: Balanced
- Impedance: 40k Ohm
- Peak input level: +25dB
- Gain control range: +35dB
- Headphone Power Amplifier Outputs Max. output level: 300mW @ 32 Ohms (max 1W @ 32 Ohms)
- Output Impedance: 22 Ohms
- Max gain: +20dB
- Function Control
- Volume: Per Channel, Variable
- Mono/Stereo switch: Per Input Set
- Power Supply AC Requirement: Selectable 100-120VAC, 200 – 240VAC, 50-60Hz
- Distortion: 0.02%
- Frequency response: 20Hz-20kHz
- S/N Ratio > 80dB
- Crosstalk rejection > 68dB @ 1kHz; 20dB Input
Out of Stock
You may also like…
High Grade Extension Cable for Headphone Amps 6ft
Recommended for connecting your professional headphone amplifier to any audio interface, mixer or any source with TRS 1/4 Headphones output.
Professional High Grade Insulated Cable
2 Meters (6ft)
Features:
– TS connectors with internal strain relief for rugged reliability
– Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
– OFC spiral shield for effective EMI and RFI rejection and flexibility
*These are custom made cables, slight color & design variations are expected
Headphone Amps Stereo Cable 6ft
Recommended for connecting your headphone amplifier to any audio interface, mixer or any source with TRS 1/4 Headphones output.
2 Meters (6ft)
*Colors may vary
Professional Grade TRS Balanced Cable
- Professional Studio Grade Balanced Microphone Cable with Flexible Overall Jacket
- O.F.C. (Oxygen Free Copper)
- Low Noise EMI Shielded Cable for Pure Signal Transparency
- High Grade TRS - TRS Connectors
- Length : Available in 10, 20, 30 & 50ft
- * Connector designs & colors may vary slightly
TRS Balanced Cable
These cables are designed to connect gear with TRS outputs to gear with TRS inputs. It is ideal for use in studio, touring and other live-sound applications.
3 Meters
Features:
– TS connectors with internal strain relief for rugged reliability
– Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
– OFC spiral shield for effective EMI and RFI rejection and flexibility
*These are custom made cables, slight color & design variations are expected
Related products
Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier
In-ear Monitor Powered Amplifer with XLR/TRS Combo Input and 3.5mm TRS Headphone Output
Alctron HA4 Plus Headphone Amplifier
HA4 PLUS mini headphone amplifier splits a single stereo signal into four headphone outputs. The unique circuitry delivers top-notch sound even in a harsh environment. Each channel comes with its own level control without interaction. Its USB power supply design allows it powered by PC, phone charger, bank charger etc. High quality steel chassis provides extreme durability.
- Its USB power supply design allows it powered by PC
- High quality steel chassis provides extreme durability
- HA4 PLUS mini headphone amplifier splits a single stereo signal into four headphone outputs
- Each channel comes with its own level control without interaction
- Line inputs Type: 1/4’’ TRS connector, stereo
- Impedance: 100kΩ max, 10kΩ min
- Max input level: +20dB
- Headphone outputs Type: 1/4’’ TRS connector, stereo
- Impedance: 47Ω
- Max output level: 40mW in 100Ω
- Power supply: USB 5V
- Dimensions: 110mm*60mm*48mm
M-Audio AIR|Hub Monitor Station – Headphone Amp
3-in-1 Monitor Station, Headphone Amp, and USB Hub
If you, like many of us at Sweetwater, are an on-the-go music mixer or content creator, the M-Audio AIR|Hub is about as useful as they come. This one device combines a pro-grade monitoring station with an independent headphone amp and a USB hub for charging and interfacing devices. Audio is delivered to your ears or studio monitors in flawless 24-bit/96kHz quality, allowing you to make critical mix and mastering decisions at home or on the go. Meanwhile, and onboard USB hub keeps up to three of your devices — controllers, peripherals, or hard drives — connected to your workstation over a single rock-solid USB-C connection, with round-trip speeds as low as 2.59ms*. A software suite that includes Pro Tools | First DAW, 20 Avid effects plug-ins, the AIR Music Technology Xpand!2 virtual instrument, and 2GB of Touch Loops content equips you and the M-Audio AIR|Hub with all you need to start making great mixes straight out of the gate. * 2.59ms latency is dependent on hardware and buffer settings
Features:
- Command Central of your home studio
- Combines a professional monitor controller, headphone amp, and 3-way USB hub
- Rugged metal chassis
- Breathtaking 24/96 conversion
- Solid-feeling central knob quickly adjusts listening levels
- 1/4" headphone output with independent level control
- 3 USB ports for connection gear and peripherals
- Includes USB-C and standard USB connection cables
High-speed USB-C
USB-C protocol (also compatible with USB 2.0) gives the AIR|Hub fast round-trip speeds — as low as 2.59ms — to minimize latency for critical monitoring. USB-C and standard USB connection cables are included.
Rugged tabletop form factor
The M-Audio AIR|Hub's desk-friendly form factor sits conveniently beside your laptop or controller, with an ergonomic tilt that improves visibility for desktop use. A feature we at Sweetwater have enjoyed in all recent AIR interfaces is the large central volume knob, which is unmistakable and easy to access for setting desired monitoring levels. The all-metal chassis feels great underhand and is sure to hold up to location mixing.
Included Software:
- Pro Tools | First
- 20x Avid effects plug-ins
- AIR Music Technology Xpand!2
- 2GB of Touch Loops content
HA400 4-Channel Stereo Headphone Amplifier
Ultra-compact 4-channel stereo headphone amplifier for all types of headphones.
The super-compact, flexible HA400 can amplify up to 4 pairs of headphones and up to 4 independent volumes all at the same time.
Have up to 4 different people in your studio use the HA400 headphone amp to hear the main mix while recording, and each listener can set their own volume level using the MICROAMP’s dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are included for outstanding audio performance. These are the same op amps found in full-size audio equipment. includes a DC 12-Volt adapter with the HA400 Headphone Amp.- 4-channel stereo headphone amplifier for use with all types of headphones
- Four high-power stereo amplifiers
- Highest sonic quality even at maximum volume
- Output level control for each channel
- Ultra low-noise 4580 operational amplifiers for outstanding audio performance
- DC 12-Volt adapter included