Shotgun Microphones

Sennheiser MKE 400 Camera Microphone

Supercardioid Condenser Camera-mount Shotgun Microphone for DSLR, Mirrorless Cameras, and Mobile Devices with Selectable Sensitivity, Highpass Filter, and Headphone Jack

Call for Price 03145111100

Sennheiser MKE 600 Shotgun Condenser Microphone

Supercardioid Short Shotgun Mic with Phantom or Battery Powering, Switchable Low Cut Filter, Foam Windshield, and Shock Mount

Call for Price 03145111100

Sennheiser MKH 416 Shotgun Condenser Microphone

Compact Shotgun Condenser Microphone with Pressure-gradient Receiver, Short Interference Tube, and Hypercardioid/Lobe Pattern

Call for Price 03145111100

5 Core AR-775 Shotgun Condenser Mic Pack

Stylish, rugged, and fine-looking 5 CORE's unidirectional interview microphones are ideal to use at press conferences as well as seminars. These easy to pack and carry render great satisfaction and high-end results and good compatibility while connecting to amplifiers. Effortless configurations make them ideal to use for interviews.

Superior-quality electret condenser type cartridge which provides high sensitivity in the Microphone
Pack Includes Foam Windscreen, Microphone Cable, Mic Clip & High Quality Travel Case

Features: . Premium quality metal-bodied interview microphone with a metal switch . Unidirectional Microphone with a pick-up range of 20cm-30cm . Runs on AA-sized battery Tech Specification: Frequency Response - 50hz-16khz Directivity - Uni-directional Output Impedance - 2k+-2% unbalance Sensitivity - 10-20mV (shot gun) 70-90mV (long) S/N - >72dB Cartridge Type - Electret Condenser Wire Length - 4.5 X 8m Pick-up Distance - 20cm-30cm

PKR 16,500 Add to cart

Audio-Technica ATR6550 Condenser Shotgun Microphone

Crisp and intelligible pickup -- far away or up close. In its "Tele" range setting, this cardioid condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. Designed especially for use with video cameras.

3.5 mm connector plugs into your video camera
Two range settings: "Normal" for close & medium-distance; "Tele" for long-distance
Includes camera-mount, stand clamp, foam windscreen, battery, 1/4" adapter
Two range settings: Normal for close & medium-distance; Tele for long-distance

PKR 19,000 OUT OF STOCK

Made in Australia

RODE NTG1 Shotgun Condenser Microphone

Shotgun Mic For Film and Video from RODE

By now, we all know that when the multi-award winning RODE company puts its mind to creating a mic, it's going to be solid, rugged, great sounding, and a lot less expensive than microphones that are sonically equivalent. The NTG-1 represents RODE's genius for innovation in the field of designing microphones specifically for video applications. The new RODE NTG-1 is a lightweight condenser shotgun microphone, which has been specifically designed for professional applications within the film, video, television, voice-over and ENG (Electronic News Gathering) industries. The NTG-1 provides an electronically balanced output stage and operates on 48V phantom power. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low-noise SMT electronics. The RODE NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles. The NTG-1 comes complete with mount and windshield. The windscreen effectively supresses wind noise when recording outdoors in moderate conditions. RODE NTG-1 Features:

Super Cardioid.
Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave.
Maximum SPL: 139dB
Broadcast sound quality.
Rugged metal contruction.
Condenser microphone transducer.
Weighing 105 grams approx. (3 oz).
Low noise circuitry.
Low handling noise.
Supplied with stand mount and zip pouch.
Designed and manufactured in Australia.

PKR 59,900 Add to cart

Made in Australia

RODE VideoMic Pro with Rycote Lyre

Shoot Better-sounding Video

Want to elevate the audio quality of your video productions? It all starts with your mic. The Rode VideoMic Pro R takes their successful VideoMic Pro shotgun design and adds a Rycote Lyre shockmount, which does a superior job of isolating the mic capsule and electronics from vibration that can cause audio-ruining rumble. Rycote is well known throughout the motion picture/television industry for making bulletproof professional products that perform on the set, so you can shoot with confidence. Whether you're capturing sound with your camcorder, DSLR, or portable audio recorder, the Rode VideoMic Pro R is your ticket to better audio.

The superior shockmount solutionThe Rode VideoMic Pro R's integrated Rycote Lyre shockmount system isolates the microphone's capsule and electronics from its mount, giving you immunity to vibrations that may result in muddy-sounding audio. Whether you're hand-holding, or your camera is tripod- or steadicam-mounted, vibrations can find their way to your mic and ruin an otherwise good shot. The Rycote shockmount stops those vibrations completely. Constructed from a single piece of rugged thermoplastic, the Lyre provides better acoustic suspension than traditional elastic shock mounts - plus, it will never sag, break, or wear out. Video producers have been enthusiastic about the original Rode VideoMic Pro - and the Rycote shockmount makes it even better! A serious shotgun micSpec'd with a 1/2" condenser capsule that delivers broadcast-quality sound, the Rode VideoMic Pro R is a true shotgun mic optimized for audio capture with camcorders, DSLRs, and portable audio recorders. Sporting an impressively low self-noise of just 14dB, the VideoMic Pro R is fitted with an 1/8" TRS connector that outputs the mono signal to both left and right channels of your camera or recorder. The mic's super-cardioid polar pattern minimizes off-axis audio, focusing on the subject in front of your lens.

Broadcast-quality condenser microphone
Integrated Rycote Lyre shockmount system
New low-noise, high-sensitivity capsule design
Compact form factor (6" length)
Ultra-lightweight (3oz.)
9V battery powered - over 70 hours use (alkaline)
Integrated foam windscreen
3.5mm stereo TRS jack output (dual mono)
2-step highpass filter (flat, 80Hz)
3-position level control (-10dB, 0, +20dB)
Camera-shoe mount with 3/8" thread
10-year warranty with online registration

PKR 63,900 Add to cart

Made in Australia

RODE VideoMic NTG

Supercardioid Shotgun Condenser Mic Optimized for Camcorder Use with Rycote Lyre Shockmount System, Built-in Rechargeable Lithium-ion Battery, Annular Line Tube Technology, and USB Compatibility

PKR 66,700 Add to cart

Made in Australia

RODE NTG2 Multi-powered Shotgun Microphone

Put RØDE Sound Quality into Your Video or Film Project!

You know you can count on RØDE for an outstanding mic at a great price. And that extends to film and video work! When you need a quality shotgun mic that's built to perform, you want RØDE's NTG-2. It's lightweight, so you'll have no problems using it as a camera-mounted mic or on a boom pole. The NTG-2 also sounds absolutely great, thanks to its wide frequency range and tight supercardioid pickup pattern. Want tough? It'll take what you can dish out and keep sounding fantastic, in any environment. Want flexibility? This mic can be phantom powered or you can run it off of a battery. The NTG-2 comes complete with a mount and a handy windshield.

RØDE NTG-2 Supercardioid Shotgun Microphone Features at a Glance:

Supercardioid
Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave
Maximum SPL: 131dB
Broadcast sound quality
Rugged metal contruction
Condenser microphone transducer
Weighing 161 grams approx. (5.17 oz.)
Low noise circuitry
Low handling noise
Supplied with stand mount and zip pouch
Designed and manufactured in Australia

PKR 80,000 Add to cart

Made in Australia

RODE NTG4

Capture Better Sound for Your Media Productions

A revised take on a time-tested shotgun mic from Rode, the NTG4 offers you premium broadcast-ready sound and the versatility you need to use it on and off camera. One of the things about this highly directional condenser microphone that really stood out to the engineers here at Sweetwater is how quiet it is. Part of that has to do with the persistent-state digital switching used to toggle the NTG4's onboard highpass filter, -10dB pad, and high-frequency boost. And with its rugged metal design, your Rode NT4 will be ready to go anywhere you need to go.

A broadcast-grade shotgun microphone based on the time-tested Rode NTG1
Premium line-gradient condenser capsule circuitry delivers extremely low noise
Switchable -10dB pad, 75Hz high pass filter, and high-frequency boost offer added versatility
Persistent-state digital switching retains settings even after the mic is switched off
Heavy-duty metal chassis ensures roadworthiness for serious media production
Includes an RM5 mic clip, a ZP1 padded zip pouch, and a Windshield foam windscreen
A perfect fit for Rode's SM3, SM4, SM5, and Blimp shotgun mounts

PKR 81,000 Add to cart

Made in Australia

RODE VideoMic Pro+

Supercardioid Shotgun Condenser Mic Optimized for Camcorder Use with Integrated Rycote Lyre Shockmount System, Digital Switching, and Automatic Power Function

PKR 87,000 Add to cart

Made in Australia

RODE NTG4+ Shotgun Microphone

Shotgun Performance and Convenience

A revised take on a time-tested shotgun mic from Rode, the NTG4+ offers you premium broadcast-ready sound and the versatility you need to use it on and off camera. One of the things about this highly directional condenser microphone that really stood out to the engineers here at Rode is how quiet it is. Part of that has to do with the persistent-state digital switching used to toggle the NTG4+'s onboard highpass filter, -10dB pad, and high-frequency boost. The convenience of an internal battery The Rode NTG4+ is fitted with an internal rechargeable lithium battery that gives you more than 150 hours of operation on a single two-hour charge - ideal for even the most grueling production schedule. Rode has included a MicroUSB cable that makes charging easy and convenient, letting you charge your mic with your computer or power brick - or even your car.

Broadcast-quality sound
Low-noise circuitry
Fully charged in under two hours via MicroUSB
Over 150 hours operation per charge
Rugged metal construction
Convenient digital switching
High-frequency boost
Highpass filter (Flat/75Hz)
PAD (-10dB)
MicroUSB cable included
Ten year extended warranty with online registration
Requires +48V phantom power or will run on internal rechargeable battery

PKR 88,000 Add to cart

Made in Australia

RODE NTG5 Kit

Shotgun Condenser Microphone with Supercardioid Polar Pattern, Annular Line Tube Technology, and Moisture-resistant Design

PKR 149,500 Add to cart