Back to Effects Pedals
Tomsline AT-07 Pedal Tuner
PKR 7,500
Tom’sline Engineering Pedal Tuner AT07
- Chromatic for Guitar (6-7 strings) and Bass (4-6 strings)
- High Definition Color Screen
- Pitch 430-450Hz 4 Flat Options
- True Bypass
- Mini Pedal Size
Category: Effects Pedals
Related products

NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design

NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.
EBow PlusEBow Electronic Bow for Guitar
Reverse delay and violin bow-like effects in the palm of your hand.
Use the EBow Plus rather than your pick, and create awesome synth effects. A small electrical charge sets up an energy field, vibrating the string giving you limitless sustain until you pull it away. The tiny, 9V-battery-powered PlusEbow replaces your pick, letting you mimic strings and synths and create outlandish sounds beyond any instrument.
The Plus EBow lets you play as fast as your left hand can scurry through a lick. Fade a string in from a motionless state for a reverse-tape effect. Run the EBow across the strings for gorgeous arpeggios. Add distortion for a screaming guitar sound. Playing the PlusEBow directly over the pickup will increase your volume and give you the crisp sound of super hot pickups. Moving away from the pickup gives you the mellow sound of a hollowbody electric. The sounds you discover by experimenting with the EBow will amaze you. And like the best tools of the trade, the EBow will sound different for each musician.
4 Way Power Splitter for DC 12V or 9V adapters
- 4 Way Power Splitter for DC 12V or 9V adapters for Multiple Pedals Power Supply
- Recommended for pedal boards with multi effect pedals or stomp boxes
- Please use high quality power supply adapters for multiple pedals connectivity