Back to Effects Pedals
Tomsline ADL-3 Mini Delay
PKR 9,500
- Mini in size, fit in the hand of the adult or just put it into pocket.
- Light-weight and portable, easy to carry along.
- Allows wide range of delay time from 50ms to 400ms.
- True bypass design, minimize tone loss and get more control of your pedal.
- 3 adjustable knobs: Time, Feedback, Level. Powered by a 9V power adapter
Category: Effects Pedals
Related products

NUX Mod Core Deluxe Modulation Effects Pedal
Richest modulation pedal, beautiful sound colorization

Boss DD-3 Digital Delay Pedal
Crystal Clear Stereo Digital Delay and Echo!
The BOSS DD-3 Digital Delay pedal makes it easy to add amazing delay effects to your guitar rig - and it's sized just right for any pedalboard! Housed in a rugged metal enclosure, the compact DD-3 Digital Delay provides rackmount-quality sound with three different settings for a range of effects. You can go from chorus-y shimmer to 800ms atmospheric repeats almost instantly, and a hold function lets you repeat a delay indefinitely while you play over it. You can use its additional direct output to play through a second amp for a true stereo delay setup, too. Plug into a time-tested pedal - get great textures and effects with the DD-3 Digital Delay! BOSS DD-3 Digital Delay Guitar Effect Pedal Features:- High-quality sound
- Three delay time modes from 12.5ms to 800ms
- Hold function repeats sound indefinitely
- Compact and tough metal housing
- Clearly marked, easy-to-use controls

NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.
NUX Metal Core Distortion Pedal
Nux Metal Core Pedal Effect
The Nux Cherub Metal Core Guitar Effects Pedal is a guitar effects pedal with 2 types of metallic sounds and a built-in 2-Band EQ. This metal core features in tone lock function which will ensure the preset will not be changed during performance by disabling the button function. True bypass design minimizes loss of tone.
Diagram
- Power in
- Gas knob : Metal gain control
- Bass knob : Adjust the bass of the metal
- Out jack: Connect the core to the guitar amp
- On / Off toggle
- Variable tone lock & toggle switch: Select Voice 1 or Voice 2; freeze the current by switching it to the middle position
- Lever class : Metal level control
- Treble knob : Treble metal
- LED Indicator : Shows effect status - On / Off
- Input jack : Connect the core to the guitar
- Presets : 1 storable user presets
- Sampling frequency : 44.1 kHz
- Digital A / D : 24-bit
- Signal processing : 32-bit
- Frequency Response : 20Hz-20000Hz ± 1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic Range: 100dB
- Input : -20dBV
- Output : -10dBV (10k output load impedance Or more)
- Power : 9V DC (9V Battery or ACD-007A Adapter) (not included)



