Back to Guitar Gear Equipment
Power Plus 9V Battery for Guitars
PKR 150
Standard Heavy Duty 9V Battery Compatible with All active guitar preamps with 9V power.
Nominal voltage: 9 V
Impedance: 1,700 m-ohm @ 1 kHz
Typical weight: 45 g (1.6 oz)
Typical volume: 22.8 cm (1.4 in)
Terminals: Miniature snap
Operating temperature range: -20ºC to 54ºC (-4ºF to 130ºF)
Related products
Behringer Ultra-G GI100 DI-Box
An active DI Box for guitar with fantastic speaker simulation.
The Behringer Ultra-G GI100 DI Box features a switchable speaker simulation that so realistically emulates a 4x12 cab you may never mic your speakers again. Features include switchable input attenuation allowing levels of up to +48dBu, a ground lift switch to eliminate loop problems, and a rugged roadproof aluminum case. An internal battery automatically shuts off when phantom power is connected.
- Realistically emulates a 4x12 cab
- Switchable input attenuation allowing levels of up to +48dBu
- Ground-lift switch to eliminate loop problems
- Rugged roadproof aluminum case
NUX B-2 Plus Guitar Wireless System
The NUX B-2 PLUS is a pocket-size 2.4GHz wireless system that offers guitar players an easy solution to go wireless. Step on the latest NUX wireless transmission algorithm, B-2 PLUS secures a better connection in a noisy RF environment. With the newly-added auto-off function, you’ll never have to worry about leaving the system on and draining out the batteries. NUX B-2 PLUS offers 32bit/44.1KHz high definition audio quality and has a comparable operating range of 60 feet(line-of-site) with less than 5ms of latency. You can hardly find anything better within the same price range. Products utilizing the 2.4GHz frequency band is everywhere nowadays; it’s critical to find a way that can avoid most unwanted interference. Instead of increase the transmit power, we decided to narrow down the bandwidth to 2Mb so that B-2 PLUS can find the most available band. It’s like driving a Motorcycle through a crowded highway.
- Operating Frequency Band: 2.4 GHz
- Audio Quality: 32-bit / 44.1 kHz
- Operation Range: Up to 15 meters / 60 feet line-of-sight (environment-dependent)
- Frequency Response: 20 Hz – 20 kHz
- Latency: Less than 5ms
- THD+ Noise: Less than 0.05% 1kHz @-10dbFS
- Built-in Battery Capacity: 3.7V/750mA (Transmitter & Receiver)
- Battery Life: Up to 7 hours of playing time
- Dimensions: 73(L) x 40(W) x 55(H) mm
- Weight: 57g
Price Drop!
Original price was: PKR 16,500.PKR 15,000Current price is: PKR 15,000.
Add to cart
Behringer Ultra-DI DI20 2-channel Active Direct Box / Splitter
Presto Chango DI Box
The Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter can convert two separate unbalanced 1/4" inputs into two balanced XLR outputs. Need a signal splitter? The DI20 does that too. Whether you're a keyboardist, guitarist, or bassist, you'll marvel at the flexibility this little box gives you. Feed it two mono signals, a stereo signal, or a split signal feeding two separate amps. You also get a groundlift and a 3-position input attenuator to school unruly signals - so you can even connect it to your guitar amp's speaker output! The Behringer Ultra-DI DI20 is cool. Behringer Ultra-DI DI20 Active 2-Channel DI-Box/Splitter Features at a Glance:- Multi-purpose direct injection box for stage and studio applications
- Provides impedance and signal matching for direct connection of instruments to mixers and amplifiers
- Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs
- Additional Split mode (channel 1 assigns signal to both XLR outputs)
- Ultra-flat frequency response due to servo-balanced operation
- Internal battery automatically shuts off when phantom power is applied
- Allows direct connection to speaker outputs with up to 3,000W
- Groundlift switch eliminates typical ground loop problems
- Input 2 usable as channel 1 Link output (additional to XLR output)
- TRS and gold-plated XLR connectors
- Ultra-rugged, road-suitable metal case
- High-quality components and exceptionally rugged construction ensure long life
NUX STB-4 Guitar Effect Pedal Board with Bag
STB-4 is a very durable pedalboard with carrying bag. You can stick your pedals on the STB-4 and hide the cables inside.