Back to Effects Pedals

MOOER EchoVerb Reverb

PKR 17,000

Echo Verb combines a new high quality reverb and digital delay into one small pedal. Either effect can be used alone or simultaneously for. The versatile controls allow the user to easily dial in Echo Verb to be used in a myriad of different ways, be it subtle ambient enhancement or huge wet special effects. The delay comes complete with Tap Tempo which can be operated via the footswitch or with the small LED button in the centre of the pedal. Perfect companion for a small pedal rig.

Category:

Controls switch: Depicts which effect the controls are adjusting. Switch up to adjust Delay(Tape Echo) parameters switch down to adjust reverb  parameters.

LEVEL/MIX control: Adjusts volume of delay and wet/dry mix of reverb.

TIME/TONE: Adjusts Delay time(45ms-1600ms) and Reverb tonality.

FB/DECAY: Adjusts Delay feedback and Reverb decay (Room-Mountains）.

Tap Tempo Functionality:

1、Footswitch Mode: Depressing the footswitch for more than 1 seconds will engage Tap Tempo functionality and the LED will flash. Tap the footswitch two or more times to synchronize the delay to your desired tempo. The pedal will revert back to normal operation after 5 seconds.

2、LED Mode: Tap the LED 2 or more times to synchronize the delay to your desired tempo.

Related products

NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood.  Just enjoy the  1 Simple Control-Knob,  2 Boost Options, and 2 Bypass Modes. The 2 Boost Modes:  Clean Boost In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available. Crank Boost If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge! Higher Voltage, Increased Headroom & Dynamic     Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic. WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion. True Bypass or Buffer Bypass Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer. A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass You can change the bypass mode by turning on the power while holding the footswitch. Summary:  * True Bypass / Buffer Bypass  * 2 types of boost options (Clean & Crank)  * Dual FET Circuit Design for the most tube-like tone in a transistor design
PKR 14,500 OUT OF STOCK
NUX Time Force Multi Digital Delay
A total of 11 delay models including tape, analog, reverse and more, provide best tone of full direction. Either instrument input or loop jacks of guitar amp can be connected to TIME FORCE with -10dB or +4dB input/out put, and kill dry functions. Flexible I/O jacks detect the stereo and mono connections automatically, which enable more routing possibilities. 40 seconds in stereo loop station make the practice full of fun. Tail function makes effect sound fade out when the effect is off. Tap tempo with different sub division can input the delay time easily Effects types 11 modeling delay modes Presets up to 9 storable user presets plus manual mode Sampling frequency 44.1 kHz A/D converter 24-bit Signal processing 32-bit Frequency response 20Hz-2000Hz ±1dB THD+N 93dBu (＜0.003%) A-Weighting Dynamic Range 100dB Input -20dBV@1MΩ Output -10dBV(Output load impedance of 10 KΩor more) Display 128*128 TFT Power 9V DC (9V battery or optional ACD-007A Adaptor) Dimension 125(L) * 108(W) * 57(H) mm Weight 390 g
PKR 24,000 OUT OF STOCK
Boss DD-3 Digital Delay Pedal

Crystal Clear Stereo Digital Delay and Echo!

The BOSS DD-3 Digital Delay pedal makes it easy to add amazing delay effects to your guitar rig - and it's sized just right for any pedalboard! Housed in a rugged metal enclosure, the compact DD-3 Digital Delay provides rackmount-quality sound with three different settings for a range of effects. You can go from chorus-y shimmer to 800ms atmospheric repeats almost instantly, and a hold function lets you repeat a delay indefinitely while you play over it. You can use its additional direct output to play through a second amp for a true stereo delay setup, too. Plug into a time-tested pedal - get great textures and effects with the DD-3 Digital Delay! BOSS DD-3 Digital Delay Guitar Effect Pedal Features:
  • High-quality sound
  • Three delay time modes from 12.5ms to 800ms
  • Hold function repeats sound indefinitely
  • Compact and tough metal housing
  • Clearly marked, easy-to-use controls
PKR 50,000 OUT OF STOCK
NUX CH-3 Vintage Chorus Pedal
Unpressed music is like a fly in the ointment. This chorus effect pedal with 3 adjustable knobs including depth, blend, and speed knob will compensate for the pity. Designed with true bypass , it will minimize tone loss. It is a good guitar accessory which brings you a musical feast. 
  • High quality effect with flexible function.
  • Adopted low noise BBD in delay circuit, natural and clear sound.
  • True bypass design, minimizes tone loss and get more control of your pedal.
  • LED indicator shows status of effect and battery condition.
  • The pedal can be powered by a battery or AC adapter.
Specifications: Color: Yellow Input impedance: 1M Ohms Output impedance: 10K Ohms Power: 9V Battery or 9V AC Adapter (not included) Product size: 11.7 * 6 * 3cm / 4.6 * 2.4 * 1.2in Product weight: 238g / 8.4oz Package size: 12.5 * 8.5 * 5.5cm / 4.9 * 3.3 * 2.2in Package weight: 298g / 10.5oz Package List: 1 * CH-3 effect pedal 1 * User manual (English & Chinese)
PKR 15,000 OUT OF STOCK