Behringer Ultragain Pro-8 Digital ADA8000
WhatsApp 03145111100
ULTRAGAIN PRO-8 DIGITAL ADA8000
The 8 In/8 Out ULTRAGAIN ADA8000 ADAT Audio Interface is one of our all-time, best-selling products. The incredible ADA8000 features audiophile-grade 24-bit A/D – D/A converters for ultimate signal integrity, optical ADAT in/out interface for ultimate compatibility, and our “Invisible” Mic Preamps – making it the natural choice of professional musicians and audio engineers alike. Your recording tracks will sound just as amazing as you imagined them – when you lay them down with the ADA8000!
ADAT-Ready
The ADA8000 is sublimely easy to operate, fits neatly into a single rack space and, thanks to the 8 IMP “Invisible” mic preamps with switchable +48 V Phantom Power and audiophile-grade 24-bit A/D – D/A converters, you get incredibly detailed, pristine performance. Signal conversion takes place at your choice of 44.1 or 48 kHz with full 24-bit resolution. The ADAT Inputs and Outputs can be operated independently, as long as you use an identical wordclock signal. And ADA8000’s operating frequency range is an ultra-wide 10 Hz to 24 kHz – at a very respectable, 48 kHz sampling rate. Put simply, the ULTRAGAIN ADA8000 is the professional’s edge.
Outstanding “Invisible” Mic Preamps
The ULTRAGAIN ADA8000 features our ultra-low noise, high-headroom IMP “Invisible” mic preamps, which have been praised by audio professionals all over the world. These studio-grade mic preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to over 200 kHz, and are perfectly matched to every conceivable microphone – with up to 60 dB gain and a +48 V phantom power supply. Armed with these outstanding mic preamps, the ADA8000 provides exceptionally-transparent and crystal-clear sonic performance – making it the ideal choice for both live sound and studio recording applications.
Related products
Behringer Ultra-DI Pro DI4000
ART Pro-VLA II 2-channel Opto Tube Leveling Amplifier
An Effective, Affordable Compressor/Leveling Amp from ART!
The ART Pro-VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed for tracking, mixing, mastering, live sound, or broadcast situations. By using an opto-electronic design, (as opposed to a more typical VCA driven level detection circuit) the Pro-VLA II allows more compression to be added to an audio source with a more natural, musical sounding output and virtually transparent dynamic leveling. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II an ideal dynamic control device! Great in the studio or live ART's Tube Compressor/Leveling Amplifier deliver analog leveling/compression designed to work seamlessly with any recording, sound-reinforcement, and electronic instrument application. It excels at making tracks sound rich and full for both live audio engineering and studio recording applications. Tube compression circuitry ART's tube compression circuitry is a hybrid design utilizing advanced analog and tube technology, and has exceptional signal integrity with extremely low noise. Vactrol This unit utilizes optical electronics (a device known as a Vactrol), coupled with a 12AT7 vacuum tube gain stage for superior musical performance. Unlike typical compressors which use VCAs to control level detection, ART tube compressors are very musical, expressive and natural-sounding.- Vactrol Opto-Compression Design (no VCA)
- Mastering-Quality Audio Signal Path with Tube Gain Stage
- Enhanced Link Mode - While in stereo link mode, channel 1 level control acts as a master output level and channel 2 becomes a balance control between them, - optimizing the Pro-VLA II for use as a mastering tool
- Variable Threshold, Ratio & Output Controls
- LED Backlit VU Input/Output Level Metering
- LED Metering Indicates Both Average Level And Peak Hold
- Accurate Ten Segment LED Gain Reduction Metering
- +4dBu/-10dBV Mode Switch Optimizes Pro-VLA II For Interface With Professional OR Consumer Grade Components
- Active Balanced XLR And 1/4-inch Inputs and Outputs
- Toroidal Transformer Reduces Mechanical and Electrical Hum
iCON ReoTube G2
ReoTube G2
- A true tube Microphone/Instrument preamp
- Limiter build-in for leveling control
- “Saturation” for harmonic/warmth adjustment
- Input gain control with LED metering displays
- Enhance control
- Analog VU meter with warm orange backlight
- 48V phantom power
- Low cut switch
- Phase switch
- 1/4” jack for external processor
- Balanced XLR microphone input and 1/4” TRS input
- XLR connector for balanced line output
- Rugged aluminum construction and adopted ICON’s Reo series racking system
Behringer Tube Ultragain MIC200
Quick and easy preamplification for studio or stage.
The Behringer Tube Ultragain MIC200 Mic Preamp is a vacuum tube preamplifier with preamp-modeling technology and an integrated limiter. It's perfect for studio, live, and hard-disk recording applications. Preamp modeling allows you to quickly optimize your recordings by choosing from 16 voicings for vocals, acoustic and electric guitars, bass, keyboards, drums, and more. A carefully selected 12AX7 vacuum tube provides warmth and low-noise operation. Includes a phase reverse switch, +48V phantom power, and 20dB pad. 1/4" TRS and gold-plated XLR connectors give the Behringer Tube Ultragain superior balanced I/O.
- Modeling preamp w/16 voicings
- Integrated limiter
- 12AX7 vacuum tube
- Phase reverse switch
- +48V phantom power
- 20dB pad