Back to Condenser Microphones
“Audio-Technica AT2035” has been added to your cart. View cart
Audio-Technica ATM31a Cardioid Condenser Microphone
PKR 32,500
- Ideal for close-up vocals, overheads, piano and strings
- Sound is similar to far more expensive studio microphones
- Low-mass diaphragm ensures minimum distortion
- Cardioid pattern provides added warmth when used close up
- Operates on battery or phantom power
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Cardioid |
Frequency Response | 30-20,000 Hz |
Open Circuit Sensitivity | PHANTOM: -44 dB (6.3 mV) re 1V at 1 Pa BATTERY: -45 dB (5.6 mV) re 1V at 1 Pa |
Maximum Input Sound Level | PHANTOM: 137 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 123 dB SPL, 1 kHz at 1% T.H.D. |
Category: Condenser Microphones
Related products

Behringer B-1 Condenser Microphone Pack
A Low Cost Workhorse
The Behringer B-1 large diaphragm condenser mic gives you a lot of microphone for not a lot of money. You get the crisp sound of a studio condenser mic at a price that's great for home and project studios. The B-1 features a low-cut filter at 75Hz to give you control over the low-end response of your recordings. And thanks to the 10dB pad, you can use the B-1 on loud sound sources like drums and guitar amps. Behringer even gives you a shock-mount, windscreen, and aluminum storage case with the B-1. If you're just starting to record, or just need an alternative studio mic at a low cost, you'll appreciate the Behringer B-1 condenser mic.
- Versatile microphone at a low price is ideal for home and project studios
- Low-cut filter lets you record without low-end rumble
- Switchable 10dB pad allows you to record louder sound sources
- Shock-mount and windscreen are included
- Aluminum storage case for easy transport and safe storage
The Behringer B-1 condenser mic is an all-around studio mic.

MXL 770 Recording Kit
The popular MXL 770 is a high quality multipurpose condenser mic that vocalists gravitate to for its solid low frequency response and clear high end. To achieve this MXL uses a high-quality FET pre-amp and transformerless balanced output for wide dynamic range and low noise. Features include a low frequency roll-off to reduce unwanted rumbling and a 10db pad to facilitate a wide variety of sound sources. The 770 comes with a shockmount to reduce mechanical vibrations and a rugged carrying case. The MXL 770 is a perfect combination of quality, flexibility, and value for both professional and home recording studios.
- 20 mm gold-sputtered, 6-micron, low distortion diaphragm
- FET preamp with balanced output
- Switchable bass cut and -10 dB pad
- Legendary MXL sonic characteristics
- Comes with shock mount and rugged carrying case

Made in Australia
RODE Ai-KIT (Mic with Interface Pack)
A Complete Mic + Interface Bundle from RODE
With the RODE NT1 microphone/Ai-1 USB audio interface bundle, you're equipped to capture pristine, low-noise vocals and instrument audio anywhere you go. The RODE NT1 microphone has a present, full-bodied sound that takes vocals and acoustic instruments to the front of a mix without much sweetening. Sporting a mere 4.5dBA of self-noise, the NT1 is far and away one of the quietest mics in its class. Patented Lyre capsule suspension technology from Rycote isolates the NT1 from even the natural harmonic resonance of its aluminum body. This mic is a perfect mate for the included RODE Ai-1 interface, which features a USB-C connection for bus power and easy compatibility with modern laptops. Rounding out the package are the RODE SRM combination shockmount-pop shield, which reduces handling noise and "p" pops as you record, as well as a rugged mic cable.- Includes the RODE NT1 condenser microphone, Ai-1 USB audio interface, SRM combination shockmount/pop shield, and an XLR mic cable
- All you need to start enjoying great recordings at home or on the go
- NT1 microphone is present yet full bodied for an up-front sound without much sweetening
- 4.5dB self-noise — one of the quietest mics in its class
- 137dB SPL handling — stands up to guitar cabs and drums
- Rycote Lyre suspension isolates the capsule from the body
- Ai-1 audio interface is compact and capable
- Accurate mixing and monitoring via balanced 1/4" outs and high-quality onboard headphone amp
- USB-C connection provides bus power and direct compatibility with modern laptops
- Zero-latency monitoring
- +48V phantom power
- Includes the SMR shockmount/pop filter and an XLR cable
Price Drop!
PKR 135,000 Original price was: PKR 135,000.PKR 120,000Current price is: PKR 120,000.
Add to cart

Made in Australia
RODE NT2-A Studio Solution
A Legend Is Reborn - with Cool Extras!
The Rode NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today's modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50's and 60's. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!- The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
- 3-position variable highpass filter: Flat, 80Hz or 40Hz.
- 3-position variable pad: 0dB, -5dB or -10dB.
- Ultra low noise, transformerless SMT circuitry.
- Wide dynamic range.
- High strength heat-treated steel mesh head.
- Durable satin nickel finish.
- Internal capsule shock mounting.
- Supplied complete with soft pouch and clip.
- Designed and manufactured in Sydney, Australia.
- SM6 Shockmount
- XLR Cable
- Microphone Dust Cover
- Exclusive NT2-A Recording Techniques DVD w/John Merchant
- Requires +48V phantom power