Back to Condenser Microphones
Audio-Technica ATM31a Cardioid Condenser Microphone
PKR 32,500
- Ideal for close-up vocals, overheads, piano and strings
- Sound is similar to far more expensive studio microphones
- Low-mass diaphragm ensures minimum distortion
- Cardioid pattern provides added warmth when used close up
- Operates on battery or phantom power
| Microphones | |
|---|---|
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 30-20,000 Hz |
| Open Circuit Sensitivity | PHANTOM: -44 dB (6.3 mV) re 1V at 1 Pa BATTERY: -45 dB (5.6 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | PHANTOM: 137 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 123 dB SPL, 1 kHz at 1% T.H.D. |
Related products
MXL 990 Recording Kit
Large diaphragm, little price.
The MXL 990 Condenser Microphone with shock mount has a silky, sweet high end while retaining tight, solid low and midrange reproduction. The 3/4" gold-sputtered diaphragm creates a professional sound suited for digital and analog recording. Attractive vintage body style with champagne finish. The 30Hz-20kHz frequency response is ideal for lead and background vocal, male or female. Includes custom shock mount, mic stand adapter, and case. Remember folks, this mic requires phantom power, so make sure your console or interface delivers it before ordering.
There are a bazillion studio vocal mics on the market that break the magical $100 barrier, a traditionally unheard of price point for a studio vocal mic. Once that price floor was demolished, however, the market became flooded with offerings in the $80 - $100 price range. MXL has emerged as a true leader in this market, and the MXL990 is MXL's flagship product in that category. If a well-built, good-sounding, versatile studio microphone for less than $100 sounds like a good fit for your current needs, you can't go wrong with the MXL990.- 3/4" gold-sputtered diaphragm
- Attractive vintage body style with champagne finish
- 30Hz-20kHz frequency response
- 130dB maximum SPL
- Sensitivity: 15MV/pa
- Equivalent noise: 20dB (A-weighted)
MXL 770 Recording Kit
The popular MXL 770 is a high quality multipurpose condenser mic that vocalists gravitate to for its solid low frequency response and clear high end. To achieve this MXL uses a high-quality FET pre-amp and transformerless balanced output for wide dynamic range and low noise. Features include a low frequency roll-off to reduce unwanted rumbling and a 10db pad to facilitate a wide variety of sound sources. The 770 comes with a shockmount to reduce mechanical vibrations and a rugged carrying case. The MXL 770 is a perfect combination of quality, flexibility, and value for both professional and home recording studios.
- 20 mm gold-sputtered, 6-micron, low distortion diaphragm
- FET preamp with balanced output
- Switchable bass cut and -10 dB pad
- Legendary MXL sonic characteristics
- Comes with shock mount and rugged carrying case
Samson QL5 – Lavalier Condenser Microphone
The QL5 lavaliere microphone is an ideal choice for close body micing in presentation and video applications. The cardioid pick up pattern of the charged condenser element captures speech and vocals with great detail. The sturdy tie clip allows the microphone to be easily attached in position, secure, worry free and out of the way. A PM5 XLR adapter and windscreen are included in the QL5 ConcertLine package.
- Great for presentation and video applications
- Fixed charged condenser element
- Enhanced cardioid pickup pattern
- Sturdy tie clip securely attaches microphone out of sight
- Carry Pouch and PM5 XLR adapter included
Price Drop!
Original price was: PKR 135,000.PKR 125,000Current price is: PKR 125,000.
Add to cart
Made in Australia
RODE NT2-A Studio Solution
A Legend Is Reborn - with Cool Extras!
The Rode NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today's modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50's and 60's. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!- The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
- 3-position variable highpass filter: Flat, 80Hz or 40Hz.
- 3-position variable pad: 0dB, -5dB or -10dB.
- Ultra low noise, transformerless SMT circuitry.
- Wide dynamic range.
- High strength heat-treated steel mesh head.
- Durable satin nickel finish.
- Internal capsule shock mounting.
- Supplied complete with soft pouch and clip.
- Designed and manufactured in Sydney, Australia.
- SM6 Shockmount
- XLR Cable
- Microphone Dust Cover
- Exclusive NT2-A Recording Techniques DVD w/John Merchant
- Requires +48V phantom power