BM800 Condenser Mic USB-XLR
PKR 5,500
- The microphone is designed to plug & play. You don’t have to install any software or complex settings. Just connect to your Mac or Windows computers and start your first podcasting. (Notice: Not compatible with Xbox and Cellphone ends)
- There’s professional sound chipset preset inside. With the soundproof cotton, your voice will appear to be as actual and clear as your real voice. It has cut off most unnecessary noise and returned the most actual sound for you.
- The whole equipment in the image are available including: a). Condenser Microphone + b). Shock Mount + d). e). Windscreen Foam + g). USB Sound Card. +h). XLR-3.5mm Cable
- Mic Supports Both XLR use & USB Sound Card (Included)
Related products
Behringer B-2 PRO Condenser Microphone Pack
The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included. Requires phantom power.
- 1" dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal - 1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
Behringer B-1 Condenser Microphone Pack
A Low Cost Workhorse
The Behringer B-1 large diaphragm condenser mic gives you a lot of microphone for not a lot of money. You get the crisp sound of a studio condenser mic at a price that's great for home and project studios. The B-1 features a low-cut filter at 75Hz to give you control over the low-end response of your recordings. And thanks to the 10dB pad, you can use the B-1 on loud sound sources like drums and guitar amps. Behringer even gives you a shock-mount, windscreen, and aluminum storage case with the B-1. If you're just starting to record, or just need an alternative studio mic at a low cost, you'll appreciate the Behringer B-1 condenser mic.
- Versatile microphone at a low price is ideal for home and project studios
- Low-cut filter lets you record without low-end rumble
- Switchable 10dB pad allows you to record louder sound sources
- Shock-mount and windscreen are included
- Aluminum storage case for easy transport and safe storage
The Behringer B-1 condenser mic is an all-around studio mic.
Nady PCM-100 Classic Condenser Mic
Sterling acoustics and a retro vibe.
The Nady PCM-100 Classic Condenser Mic is perfect for broadcasting and stage vocal use. It is versatile in the studio, too. The Nady PCM-100 mic features a high-quality electret condenser element, cardioid polar pattern, and a smooth frequency response tailored for vivid vocal reproduction with a perfectly positioned presence peak. Switchable low-cut filter. Integral mic holder mount. Comes with foam-padded plastic carrying case. Requires phantom power.
- Perfect for broadcasting and stage vocal use
- Versatile in the studio
- High-quality electret condenser element Cardioid polar pattern
- Smooth frequency response with a presence peak tailored for vocals
RODE Ai-KIT (Mic with Interface Pack)
A Complete Mic + Interface Bundle from RODE
With the RODE NT1 microphone/Ai-1 USB audio interface bundle, you're equipped to capture pristine, low-noise vocals and instrument audio anywhere you go. The RODE NT1 microphone has a present, full-bodied sound that takes vocals and acoustic instruments to the front of a mix without much sweetening. Sporting a mere 4.5dBA of self-noise, the NT1 is far and away one of the quietest mics in its class. Patented Lyre capsule suspension technology from Rycote isolates the NT1 from even the natural harmonic resonance of its aluminum body. This mic is a perfect mate for the included RODE Ai-1 interface, which features a USB-C connection for bus power and easy compatibility with modern laptops. Rounding out the package are the RODE SRM combination shockmount-pop shield, which reduces handling noise and "p" pops as you record, as well as a rugged mic cable.- Includes the RODE NT1 condenser microphone, Ai-1 USB audio interface, SRM combination shockmount/pop shield, and an XLR mic cable
- All you need to start enjoying great recordings at home or on the go
- NT1 microphone is present yet full bodied for an up-front sound without much sweetening
- 4.5dB self-noise — one of the quietest mics in its class
- 137dB SPL handling — stands up to guitar cabs and drums
- Rycote Lyre suspension isolates the capsule from the body
- Ai-1 audio interface is compact and capable
- Accurate mixing and monitoring via balanced 1/4" outs and high-quality onboard headphone amp
- USB-C connection provides bus power and direct compatibility with modern laptops
- Zero-latency monitoring
- +48V phantom power
- Includes the SMR shockmount/pop filter and an XLR cable
