Samson C05 Handheld Condenser Microphone
PKR 18,000
The Samson C05 handheld condenser has been added to the ConcertLine Series. It’s great for obtaining studio quality vocals for live performance. The C05 features a 19mm multi-axis shock mounted capsule, condenser optimized cardioid pickup pattern, gold plated XLR connection and 48-volt phantom power operation. Included is an XLR mic cable, mic stand clip and carry pouch.
- Cardioid Pickup Pattern
- 19mm shock-mounted capsule
- Gold-plated XLR connector
- Die-Cast Zinc Casing
- Carry Pouch, Mic cable & Mic Clip included
Related products
Behringer B-1 Condenser Microphone Pack
A Low Cost Workhorse
The Behringer B-1 large diaphragm condenser mic gives you a lot of microphone for not a lot of money. You get the crisp sound of a studio condenser mic at a price that's great for home and project studios. The B-1 features a low-cut filter at 75Hz to give you control over the low-end response of your recordings. And thanks to the 10dB pad, you can use the B-1 on loud sound sources like drums and guitar amps. Behringer even gives you a shock-mount, windscreen, and aluminum storage case with the B-1. If you're just starting to record, or just need an alternative studio mic at a low cost, you'll appreciate the Behringer B-1 condenser mic.
- Versatile microphone at a low price is ideal for home and project studios
- Low-cut filter lets you record without low-end rumble
- Switchable 10dB pad allows you to record louder sound sources
- Shock-mount and windscreen are included
- Aluminum storage case for easy transport and safe storage
The Behringer B-1 condenser mic is an all-around studio mic.
Behringer B-2 PRO Condenser Microphone Pack
The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included. Requires phantom power.
- 1" dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal - 1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
MXL 990 Recording Kit
Large diaphragm, little price.
The MXL 990 Condenser Microphone with shock mount has a silky, sweet high end while retaining tight, solid low and midrange reproduction. The 3/4" gold-sputtered diaphragm creates a professional sound suited for digital and analog recording. Attractive vintage body style with champagne finish. The 30Hz-20kHz frequency response is ideal for lead and background vocal, male or female. Includes custom shock mount, mic stand adapter, and case. Remember folks, this mic requires phantom power, so make sure your console or interface delivers it before ordering.
There are a bazillion studio vocal mics on the market that break the magical $100 barrier, a traditionally unheard of price point for a studio vocal mic. Once that price floor was demolished, however, the market became flooded with offerings in the $80 - $100 price range. MXL has emerged as a true leader in this market, and the MXL990 is MXL's flagship product in that category. If a well-built, good-sounding, versatile studio microphone for less than $100 sounds like a good fit for your current needs, you can't go wrong with the MXL990.- 3/4" gold-sputtered diaphragm
- Attractive vintage body style with champagne finish
- 30Hz-20kHz frequency response
- 130dB maximum SPL
- Sensitivity: 15MV/pa
- Equivalent noise: 20dB (A-weighted)
RODE Ai-KIT (Mic with Interface Pack)
A Complete Mic + Interface Bundle from RODE
With the RODE NT1 microphone/Ai-1 USB audio interface bundle, you're equipped to capture pristine, low-noise vocals and instrument audio anywhere you go. The RODE NT1 microphone has a present, full-bodied sound that takes vocals and acoustic instruments to the front of a mix without much sweetening. Sporting a mere 4.5dBA of self-noise, the NT1 is far and away one of the quietest mics in its class. Patented Lyre capsule suspension technology from Rycote isolates the NT1 from even the natural harmonic resonance of its aluminum body. This mic is a perfect mate for the included RODE Ai-1 interface, which features a USB-C connection for bus power and easy compatibility with modern laptops. Rounding out the package are the RODE SRM combination shockmount-pop shield, which reduces handling noise and "p" pops as you record, as well as a rugged mic cable.- Includes the RODE NT1 condenser microphone, Ai-1 USB audio interface, SRM combination shockmount/pop shield, and an XLR mic cable
- All you need to start enjoying great recordings at home or on the go
- NT1 microphone is present yet full bodied for an up-front sound without much sweetening
- 4.5dB self-noise — one of the quietest mics in its class
- 137dB SPL handling — stands up to guitar cabs and drums
- Rycote Lyre suspension isolates the capsule from the body
- Ai-1 audio interface is compact and capable
- Accurate mixing and monitoring via balanced 1/4" outs and high-quality onboard headphone amp
- USB-C connection provides bus power and direct compatibility with modern laptops
- Zero-latency monitoring
- +48V phantom power
- Includes the SMR shockmount/pop filter and an XLR cable
