Back to Effects Pedals
“NUX STB-4 Guitar Effect Pedal Board with Bag” has been added to your cart. View cart
MOOER Noise Killer
PKR 17,000
2 Working Modes: Hard/Soft
Hard: Provide hard effect of noise reduction.
Soft: Provide soft effect of noise reduction
Full metal shell
Very small and exquisite
True bypass
Category: Effects Pedals
Related products

NUX JTC Drum & Loop
After we released the Nux Mini Core pedals and hit the market, we were asked to "please add a loop pedal into this line". So . . . ask and ye shall receive!
With the NUX JTC Drum & Loop Mini, you can choose from 11 built-in drum rhythms, and record up to 6 minutes in 24-bit high-resolutionaudio quality.
Muti-Function Footswitch
- PRESS ONCE: Record/Play/Overdub Loop.
- ( While playing loop) PRESS & HOLD: Undo/Redo the last layer.
- DOUBLE-PRESS: Stop
- PRESS & HOLD: Clear Loop.
- ( Without loop ) PRESS & HOLD for 1.5 sec to play Drum only.
- When the Drum is playing, HOLD for 1.5 seconds to Stop the Drum OR just press once to Record Loop.
- ( While Drum is playing without Loop ), you can SMART TAP TEMPO to control the speed.
- * Smallest 24 bits loop pedal with drum machine.
- * 11 Drum patterns in different music styles and Metronome.
- * Up to 6 minutes recording, unlimited overdubs.
- * Smart Tap Tempo drum machine.
- * Drum and Loop volumes can be adjusted separately separately
- * Hold the footswitch to use only drum function and control the speed with the footswitch.
- * True-bypass and analog dry-through.

NUX DS-3 Distortion
Absolutely Distorted!
NUX DS3 is an analog distortion pedal perfect for classic rock and heavy blues. Analog circuits boost your signals and make more harmonics and strong overdrive. It is possible to create good balanced sounds using gain knob and wide-ranged tone knob.- Vintage brown sound, warm but wild, if you like Eddie Van Halen, get it !
- Level, Gain and Tone knob help you adjust your favorate tone easily
- High gain and large adjustability rang, suit for various music styles
- 9V DC power supply adapter ( negtive inside ,not included) or battery
- Material of housing: Aluminum alloy
- Effect types: 12 modulation model
- Presets: Up to 9 storable user presets plus manual mode
- Sampling frequency: 44.1 kHz
- A/D converter: 24-bit
- Signal processing: 32-bit
- Frequency response: 20Hz-20kHz ¡À1dB
- THD+N: 93dBu (<0.003%) A-Weighting
- Dynamic range: 100dB
- Input: -20dBV@1M?
- Output: -10dBV (output load impedance of
- 10k Ohms or more
- Display: 128*128 QVGA TFT
- Power: 9V DC (9V battery, DC adapter (Optional)

NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design

Boss MT-2 Metal Zone Distortion Pedal
Made for Heavy Metal Rockin'
The BOSS MT-2 Metal Zone distortion pedal is one of most popular pedals - with good reason! Its unique dual-gain circuitry provides you with distortion tones that sound positively huge. You get insane levels of saturation, super-long sustain, and heavy mids and lows that are reminiscent of a stack of overdriven amps. On top of that, its 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options, giving you command over a wide range of over-the-top distortion textures. Make no mistake - if you're a hard rock or metal guitarist, then the BOSS MT-2 Metal Zone distortion pedal should be an integral part of your tonal assault. BOSS MT-2 Metal Zone Distortion Pedal Features at a Glance:- Unique dual-gain circuitry creates incredible-sounding distortion
- Provides super-long sustain and heavy mids and lows like a stack of overdriven amps
- 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options
- Tailor-made for hard rock and metal guitarists



