Back to Guitar Gear Equipment
MOOER MPW1 Micro Power Supply
PKR 28,000
Provide stable 9V DC power supply with high performance, each out put maximum current of 300 mA, can meet most of the pedal use requirement. Eight independent out put short circuit protection design, when one circuit output failure, other out put lines still can work independently. 8 LED lights indicating output status in darkness, its unique dull – polished feature can also protect your eyes from spotlights on stage.
- The 12V power adapter 12V 2A
- 460mm lines *4 (connect the pedal )
- 610mm lines *4 (connect the pedal )
- 200mm Polar conversion line (The out put power from the negative is
- changed to outside to inside is outside negative)
- Velcro tape
- Owner’s Manual
Related products
Boss MT-2 Metal Zone Distortion Pedal
Made for Heavy Metal Rockin'
The BOSS MT-2 Metal Zone distortion pedal is one of most popular pedals - with good reason! Its unique dual-gain circuitry provides you with distortion tones that sound positively huge. You get insane levels of saturation, super-long sustain, and heavy mids and lows that are reminiscent of a stack of overdriven amps. On top of that, its 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options, giving you command over a wide range of over-the-top distortion textures. Make no mistake - if you're a hard rock or metal guitarist, then the BOSS MT-2 Metal Zone distortion pedal should be an integral part of your tonal assault. BOSS MT-2 Metal Zone Distortion Pedal Features at a Glance:- Unique dual-gain circuitry creates incredible-sounding distortion
- Provides super-long sustain and heavy mids and lows like a stack of overdriven amps
- 3-band EQ with semi-parametric midrange control delivers plenty of tone-shaping options
- Tailor-made for hard rock and metal guitarists
DigiTech Bad Monkey Analog Tube Overdrive
DigiTech Bad Monkey Tube Overdrive Features:
- Delivers an overdriven tube-style sound for leads and chords
- Easy-to-use 4-knob controls for quick setting changes
- Level, Low, High and Grunge controls, plus On/Off footswitch
- 1/4" TS Input jack
- Amp Out jack for amplifier connection
- Mixer Out jack with built-in cabinet emulation for direct connection to mixer
- 9 Volt Alkaline Dry Battery with approximately 18 hours of continuous use
- Optional PS200R power supply provides 4.8 watts
- 4 15/16" length x 3 1/8" width x 2 1/8" height
- Weight 1.38 lbs.
NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design
NUX MINI Oceanic Digital Reverb
NUX Oceanic, a reverb effect as vast and deep as its name !
Its minimalistic design sails past the competition giving you endless parameter choices with one single knob. Studio-grade hardware performance makes it an essential in your arsenal of effects. Room, Hall, and Square-wave or even Outer-space reverb. It’s all there, with a simple twist of a knob. Pressing the footswitch activates a green-light indicator, transforming the DECAY knob into a wet/dry mix control. Demanding guitarists want a reverb that doesn’t drown-out their tone, and Oceanic was designed with this in mind. Instead of dull and shallow you’ll get a deep full-sounding reverb that’s so seamless, you might even forget your jamming with it. To make Oceanic a great digital reverb pedal, we used a powerful 32-bit DSP to process the complexity of its algorithm. To make it a unique reverb pedal, we programmed loads of studio-sound shaping parameters into that algorithm: Envelope Control, Multi-stage Cascade Diffuser, Multi-band Tone Decay Adjustment, Random Adjustment of Tail-tone Delay, and lots more ! We even built in a compressor mold to help fine-tune your reverb dynamics. NUX is, once again, proud to re-define the mini pedal with Oceanic, a truly extraordinary reverb pedal. Oceanic can be switched in between true-bypass and buffer bypass.