Back to Effects Pedals
Boss SD-1 SUPER OverDrive
PKR 22,000
Precise control; ultra-rich harmonics!
The Boss SUPER OverDrive SD-1 gives you the warm, smooth distortion of an overdriven tube amp without blurring the nuances of your picking technique. The unique symmetric drive circuit delivers a more rich, authentic-sounding overdrive effect. Here’s an overdrive pedal that has Level, Drive, and Tone controls that make it easy to go from mild to hard, or even use the SD-1 as a signal booster.
- Warm, smooth distortion
- Unique symmetrical gain circuit
Dial in a ‘drive sound all your own. Order now.
Related products
NUX MINI Oceanic Digital Reverb
NUX Oceanic, a reverb effect as vast and deep as its name !
Its minimalistic design sails past the competition giving you endless parameter choices with one single knob. Studio-grade hardware performance makes it an essential in your arsenal of effects. Room, Hall, and Square-wave or even Outer-space reverb. It’s all there, with a simple twist of a knob. Pressing the footswitch activates a green-light indicator, transforming the DECAY knob into a wet/dry mix control. Demanding guitarists want a reverb that doesn’t drown-out their tone, and Oceanic was designed with this in mind. Instead of dull and shallow you’ll get a deep full-sounding reverb that’s so seamless, you might even forget your jamming with it. To make Oceanic a great digital reverb pedal, we used a powerful 32-bit DSP to process the complexity of its algorithm. To make it a unique reverb pedal, we programmed loads of studio-sound shaping parameters into that algorithm: Envelope Control, Multi-stage Cascade Diffuser, Multi-band Tone Decay Adjustment, Random Adjustment of Tail-tone Delay, and lots more ! We even built in a compressor mold to help fine-tune your reverb dynamics. NUX is, once again, proud to re-define the mini pedal with Oceanic, a truly extraordinary reverb pedal. Oceanic can be switched in between true-bypass and buffer bypass.
DigiTech Bad Monkey Analog Tube Overdrive
DigiTech Bad Monkey Tube Overdrive Features:
- Delivers an overdriven tube-style sound for leads and chords
- Easy-to-use 4-knob controls for quick setting changes
- Level, Low, High and Grunge controls, plus On/Off footswitch
- 1/4" TS Input jack
- Amp Out jack for amplifier connection
- Mixer Out jack with built-in cabinet emulation for direct connection to mixer
- 9 Volt Alkaline Dry Battery with approximately 18 hours of continuous use
- Optional PS200R power supply provides 4.8 watts
- 4 15/16" length x 3 1/8" width x 2 1/8" height
- Weight 1.38 lbs.
NUX JTC Drum & Loop
After we released the Nux Mini Core pedals and hit the market, we were asked to "please add a loop pedal into this line". So . . . ask and ye shall receive!
With the NUX JTC Drum & Loop Mini, you can choose from 11 built-in drum rhythms, and record up to 6 minutes in 24-bit high-resolutionaudio quality.
Muti-Function Footswitch
- PRESS ONCE: Record/Play/Overdub Loop.
- ( While playing loop) PRESS & HOLD: Undo/Redo the last layer.
- DOUBLE-PRESS: Stop
- PRESS & HOLD: Clear Loop.
- ( Without loop ) PRESS & HOLD for 1.5 sec to play Drum only.
- When the Drum is playing, HOLD for 1.5 seconds to Stop the Drum OR just press once to Record Loop.
- ( While Drum is playing without Loop ), you can SMART TAP TEMPO to control the speed.
- * Smallest 24 bits loop pedal with drum machine.
- * 11 Drum patterns in different music styles and Metronome.
- * Up to 6 minutes recording, unlimited overdubs.
- * Smart Tap Tempo drum machine.
- * Drum and Loop volumes can be adjusted separately separately
- * Hold the footswitch to use only drum function and control the speed with the footswitch.
- * True-bypass and analog dry-through.
NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.