Back to Condenser Microphones
Audio-Technica ATM10a Omnidirectional Condenser Microphone
PKR 28,500
- Ideal for group vocals, strings, cymbal overheads, acoustic guitar and piano
- Omni pattern provides maximum ambient pickup
- Extremely smooth, extended response on- and off-axis
- Low sensitivity to popping and overload
- Operates on battery or phantom power
| Microphones | |
|---|---|
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 20-18,000 Hz |
| Open Circuit Sensitivity | PHANTOM: -44 dB (6.3 mV) re 1V at 1 Pa BATTERY: -45 dB (5.6 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | PHANTOM: 137 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 123 dB SPL, 1 kHz at 1% T.H.D. |
Related products
Audio-Technica AT2020 Condenser Microphone
Quality & Price In One Mic!
Stellar Audio-Technica performance - outstanding value! The AT2020 gives you classic Audio-Technica sound quality at an incredibly low price! Capture the subtleties and nuances of vocals and acoustic guitars, then take on screaming guitar amplifier cabinets - all with one mic. It's the Swiss Army knife of affordable condensers! At this incredible price, you can put together your own stereo mic pair! Perfectly suited for today's home and project studio, the AT2020 was designed to fit comfortably in your mix and your budget at the same time. The perfect "first microphone," we're sure the AT2020 will fit into your studio! Audio Technica AT2020 Features at a Glance:- The price/performance standard in side-address studio condenser microphone technology
- Ideal for project/home-studio applications
- High SPL handling and wide dynamic range provide unmatched versatility
- Relatively low self-noise - perfectly suited for sophisticated digital recording equipment
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
- Requires +48V phantom power
Behringer C-3 Dual-Diaphragm Condenser Microphone
Dual-diaphragm Condenser
The Behringer C-3 dual-diaphragm condenser mic is an affordable, high-quality way to put medium-diaphragm condenser mojo in your mic locker. The medium-diaphragm condenser is a studio staple, the mic you reach for when you need to capture a lead vocal or the room sound of a raging guitar cab. The C-3 gives you the big sound, plus the bonus of being able to switch pickup patterns between cardioid, omnidirectional, and figure-eight. This gives you enormous flexibility (and used to cost a fortune) Thankfully, now you have it all - affordably - with Behringer's C-3.- Medium Dual-Diaphragm Studio Condenser Microphone
- Professional medium dual-diaphragm condenser microphone for studio recording and live applications
- Ideal as main and support microphone for studio and live applications
- Selectable cardioid, omnidirectional and figure-eight pickup pattern
- Pressure-gradient transducer with shock-mounted dual-diaphragm capsule
- Perfect for acoustic instruments, overhead, piano, etc.
- Exceptionally flat frequency response and ultra-high sound resolution
- Ultra low-noise transformerless FET input eliminates low-frequency distortion
- Rugged construction with metal die-cast body
- Gold-plated 3-pin XLR connector for highest signal integrity
- Swivel stand mount and transport case included
- High-quality components and exceptionally rugged construction ensure long life
- Requires +48V phantom power
Behringer B-2 PRO Condenser Microphone Pack
High-performance, dual-diaphragm design for versatility.
The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included. Requires phantom power.
- 1" dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal - 1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
At this price, it's easy to finally get crystal clear sound for your studio. Order today.
Price Drop!
Original price was: PKR 135,000.PKR 120,000Current price is: PKR 120,000.
Add to cart
Made in Australia
RODE NT2-A Studio Solution
A Legend Is Reborn - with Cool Extras!
The Rode NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today's modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50's and 60's. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!- The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
- 3-position variable highpass filter: Flat, 80Hz or 40Hz.
- 3-position variable pad: 0dB, -5dB or -10dB.
- Ultra low noise, transformerless SMT circuitry.
- Wide dynamic range.
- High strength heat-treated steel mesh head.
- Durable satin nickel finish.
- Internal capsule shock mounting.
- Supplied complete with soft pouch and clip.
- Designed and manufactured in Sydney, Australia.
- SM6 Shockmount
- XLR Cable
- Microphone Dust Cover
- Exclusive NT2-A Recording Techniques DVD w/John Merchant
- Requires +48V phantom power