Back to Effects Pedals
Tomeline AMD-1 Metal Distortion
PKR 11,500
High gain distortion, low power consumption.
True bypass design, minimize tone loss and get more control of your pedal.
3 adjustable knobs: Gain, Tone, Level
Aluminum alloy housing, sturdy and durable.
Durable jacks and foot switch.
Designed with on / off LED, instructs effects status.
Powered by a 9V AC power adapter or 9V battery
Category: Effects Pedals
Related products
NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.DigiTech Bad Monkey Analog Tube Overdrive
DigiTech Bad Monkey Tube Overdrive Features:
- Delivers an overdriven tube-style sound for leads and chords
- Easy-to-use 4-knob controls for quick setting changes
- Level, Low, High and Grunge controls, plus On/Off footswitch
- 1/4" TS Input jack
- Amp Out jack for amplifier connection
- Mixer Out jack with built-in cabinet emulation for direct connection to mixer
- 9 Volt Alkaline Dry Battery with approximately 18 hours of continuous use
- Optional PS200R power supply provides 4.8 watts
- 4 15/16" length x 3 1/8" width x 2 1/8" height
- Weight 1.38 lbs.
NUX Phaser Core
Depths of Phaser Lots of famous guitarists are remembered with their guitar tones with phaser The effect has been used for rock, pop, jazz, funk and even metal music
Phaser Core's user friendly and simple controllers and 2 types of phaser modes made this famous equipment an all-time-favorite for professional artists and hobbyists. Its versatile 4 or 8 stage phaser circuit design allows a wide variety of sounds with an affordable price.
NUX Metal Core Distortion Pedal
Nux Metal Core Pedal Effect
The Nux Cherub Metal Core Guitar Effects Pedal is a guitar effects pedal with 2 types of metallic sounds and a built-in 2-Band EQ. This metal core features in tone lock function which will ensure the preset will not be changed during performance by disabling the button function. True bypass design minimizes loss of tone.
Diagram
- Power in
- Gas knob : Metal gain control
- Bass knob : Adjust the bass of the metal
- Out jack: Connect the core to the guitar amp
- On / Off toggle
- Variable tone lock & toggle switch: Select Voice 1 or Voice 2; freeze the current by switching it to the middle position
- Lever class : Metal level control
- Treble knob : Treble metal
- LED Indicator : Shows effect status - On / Off
- Input jack : Connect the core to the guitar
- Presets : 1 storable user presets
- Sampling frequency : 44.1 kHz
- Digital A / D : 24-bit
- Signal processing : 32-bit
- Frequency Response : 20Hz-20000Hz ± 1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic Range: 100dB
- Input : -20dBV
- Output : -10dBV (10k output load impedance Or more)
- Power : 9V DC (9V Battery or ACD-007A Adapter) (not included)