Back to Effects Pedals
Venson SCR-5 Stereo Chorus Pedal
PKR 8,500
Vintage Chorus Pedal
Stereo Chorus Pedal
Excellent Condition (Pictures attached for reference)
Powered via 9v Battery (Not Included) or Compatible Power Supply (Available Optional)
- Original products pictures are attached in Gallery
- All used products are 100% tested before listing, at store checking available
- All used products are covered under 7-days warranty.
Categories: Effects Pedals, Used Products
Related products
NUX Mod Force Multi Modulation Effects
This is an effects pedal for the guitarist who wants to color their guitar sound with unlimited sound shaping possibilities. With twelve fashion effects including the nice tape Flanger, 8-stage Phaser and spacious u-vibe, Mod Force gives you all the modulation effects you'll ever need. With its Dual Engine design, Mod Force allows you to combine Chorus, Flanger, Phaser, Tremolo and Vibrato effects in series and parallel sync the tempo between them and TAP the tempo by an individual switch button.
NUX Time Force Multi Digital Delay
A total of 11 delay models including tape, analog, reverse and more, provide best tone of full direction. Either instrument input or loop jacks of guitar amp can be connected to TIME FORCE with -10dB or +4dB input/out put, and kill dry functions. Flexible I/O jacks detect the stereo and mono connections automatically, which enable more routing possibilities. 40 seconds in stereo loop station make the practice full of fun. Tail function makes effect sound fade out when the effect is off. Tap tempo with different sub division can input the delay time easily
Effects types 11 modeling delay modes
Presets up to 9 storable user presets plus manual mode
Sampling frequency 44.1 kHz
A/D converter 24-bit
Signal processing 32-bit
Frequency response 20Hz-2000Hz ±1dB
THD+N 93dBu (<0.003%) A-Weighting
Dynamic Range 100dB
Input -20dBV@1MΩ
Output -10dBV(Output load impedance of 10 KΩor more)
Display 128*128 TFT
Power 9V DC (9V battery or optional ACD-007A Adaptor)
Dimension 125(L) * 108(W) * 57(H) mm
Weight 390 g
Boss SD-1 SUPER OverDrive
Precise control; ultra-rich harmonics!
The Boss SUPER OverDrive SD-1 gives you the warm, smooth distortion of an overdriven tube amp without blurring the nuances of your picking technique. The unique symmetric drive circuit delivers a more rich, authentic-sounding overdrive effect. Here's an overdrive pedal that has Level, Drive, and Tone controls that make it easy to go from mild to hard, or even use the SD-1 as a signal booster.
- Warm, smooth distortion
- Unique symmetrical gain circuit
Dial in a 'drive sound all your own. Order now.
NUX Lacerate FET Boost
The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.
The 2 Boost Modes:
Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available.
Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!
Higher Voltage, Increased Headroom & Dynamic
Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.
WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.
True Bypass or Buffer Bypass
Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.
Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design