Back to Effects Pedals
Vintage
Vintage
Ibanez Soundtank FL5 Flanger Pedal
PKR 16,000
Vintage Flanger Pedal
Usually flangers are heavy on the treble side, but the FL5 is different: it has more meat, more mids and adds depth and richness while providing superb flanging effects.
Get creative and dial in the perfect flange sound with the speed, depth and regeneration knobs.
Excellent Condition (Pictures attached for reference)
Powered via 9v Battery (Not Included) or Compatible Power Supply (Available Optional)
- Original products pictures are attached in Gallery
- All used products are 100% tested before listing, at store checking available
- All used products are covered under 7-days warranty.
Related products
NUX JTC Drum & Loop
After we released the Nux Mini Core pedals and hit the market, we were asked to "please add a loop pedal into this line". So . . . ask and ye shall receive!
With the NUX JTC Drum & Loop Mini, you can choose from 11 built-in drum rhythms, and record up to 6 minutes in 24-bit high-resolutionaudio quality.
Muti-Function Footswitch
- PRESS ONCE: Record/Play/Overdub Loop.
- ( While playing loop) PRESS & HOLD: Undo/Redo the last layer.
- DOUBLE-PRESS: Stop
- PRESS & HOLD: Clear Loop.
- ( Without loop ) PRESS & HOLD for 1.5 sec to play Drum only.
- When the Drum is playing, HOLD for 1.5 seconds to Stop the Drum OR just press once to Record Loop.
- ( While Drum is playing without Loop ), you can SMART TAP TEMPO to control the speed.
- * Smallest 24 bits loop pedal with drum machine.
- * 11 Drum patterns in different music styles and Metronome.
- * Up to 6 minutes recording, unlimited overdubs.
- * Smart Tap Tempo drum machine.
- * Drum and Loop volumes can be adjusted separately separately
- * Hold the footswitch to use only drum function and control the speed with the footswitch.
- * True-bypass and analog dry-through.
NUX MINI Tube Man MKII Overdrive
Genuine Tube-like sound that makes it more than your average Tube Screamer!
More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts ( diode-clipping ). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.
NUX Time Force Multi Digital Delay
A total of 11 delay models including tape, analog, reverse and more, provide best tone of full direction. Either instrument input or loop jacks of guitar amp can be connected to TIME FORCE with -10dB or +4dB input/out put, and kill dry functions. Flexible I/O jacks detect the stereo and mono connections automatically, which enable more routing possibilities. 40 seconds in stereo loop station make the practice full of fun. Tail function makes effect sound fade out when the effect is off. Tap tempo with different sub division can input the delay time easily
Effects types 11 modeling delay modes
Presets up to 9 storable user presets plus manual mode
Sampling frequency 44.1 kHz
A/D converter 24-bit
Signal processing 32-bit
Frequency response 20Hz-2000Hz ±1dB
THD+N 93dBu (＜0.003%) A-Weighting
Dynamic Range 100dB
Input -20dBV@1MΩ
Output -10dBV(Output load impedance of 10 KΩor more)
Display 128*128 TFT
Power 9V DC (9V battery or optional ACD-007A Adaptor)
Dimension 125(L) * 108(W) * 57(H) mm
Weight 390 g
NUX MINI Oceanic Digital Reverb
NUX Oceanic, a reverb effect as vast and deep as its name !
Its minimalistic design sails past the competition giving you endless parameter choices with one single knob. Studio-grade hardware performance makes it an essential in your arsenal of effects. Room, Hall, and Square-wave or even Outer-space reverb. It’s all there, with a simple twist of a knob. Pressing the footswitch activates a green-light indicator, transforming the DECAY knob into a wet/dry mix control. Demanding guitarists want a reverb that doesn’t drown-out their tone, and Oceanic was designed with this in mind. Instead of dull and shallow you’ll get a deep full-sounding reverb that’s so seamless, you might even forget your jamming with it. To make Oceanic a great digital reverb pedal, we used a powerful 32-bit DSP to process the complexity of its algorithm. To make it a unique reverb pedal, we programmed loads of studio-sound shaping parameters into that algorithm: Envelope Control, Multi-stage Cascade Diffuser, Multi-band Tone Decay Adjustment, Random Adjustment of Tail-tone Delay, and lots more ! We even built in a compressor mold to help fine-tune your reverb dynamics. NUX is, once again, proud to re-define the mini pedal with Oceanic, a truly extraordinary reverb pedal. Oceanic can be switched in between true-bypass and buffer bypass.