- You cannot add "RODE NT1-A Pack" to the cart because the product is out of stock.
Behringer MicroPower PS400 48V Phantom Power Supply
PKR 11,500
Phantom Power to Go!
Need phantom power? Grab the Behringer MicroPower PS400 phantom power supply, and power up! Just plug in the included power supply, and you’re ready to supply either 12V or 48V of phantom power to your condenser mic. Connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. If you need phantom power, look no further than the Behringer MicroPower PS400.
- Selectable 12V/48V phantom power
- Powered by included power supply
- All-metal construction
- Low-noise signal path
- Compact and portable
Related products
Behringer B-2 PRO Condenser Microphone Pack
The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included. Requires phantom power.
- 1" dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal - 1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
Audio-Technica AT2020 Condenser Microphone
Quality & Price In One Mic!
Stellar Audio-Technica performance - outstanding value! The AT2020 gives you classic Audio-Technica sound quality at an incredibly low price! Capture the subtleties and nuances of vocals and acoustic guitars, then take on screaming guitar amplifier cabinets - all with one mic. It's the Swiss Army knife of affordable condensers! At this incredible price, you can put together your own stereo mic pair! Perfectly suited for today's home and project studio, the AT2020 was designed to fit comfortably in your mix and your budget at the same time. The perfect "first microphone," we're sure the AT2020 will fit into your studio! Audio Technica AT2020 Features at a Glance:- The price/performance standard in side-address studio condenser microphone technology
- Ideal for project/home-studio applications
- High SPL handling and wide dynamic range provide unmatched versatility
- Relatively low self-noise - perfectly suited for sophisticated digital recording equipment
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
- Requires +48V phantom power
MXL 550 551 Studio Mic Kit
Two studio-quality condenser mics paired together in one package.
This incredible recording kit from MXL pairs up the MXL 550 and the MXL 551 for a ensemble that is ideal for quality-oriented but budget-minded musicians. The MXL550/551R Studio Kit delivers outstanding performance for both vocals and instruments. The MXL 550 is a robust vocal condenser microphone with exceptional clarity and tonal quality. The MXL 551 instrument microphone provides the dynamic range needed for acoustic guitars, drums, high-hat cymbals, pianos, percussion, stringed instruments and more. This is the ideal package for the home or project studio where quality is required, but on a scale most musicians can afford.
- Microphone pair that can cover all recording needs
- Perfect to use together”one for vocals, one for instruments
- Fine-tuned to deliver extra clarity and detail
- FET preamp with balanced output and low noise
- Distinctive design with a striking red body
RODE NT2-A Studio Solution
A Legend Is Reborn - with Cool Extras!
The Rode NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today's modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50's and 60's. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!- The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
- 3-position variable highpass filter: Flat, 80Hz or 40Hz.
- 3-position variable pad: 0dB, -5dB or -10dB.
- Ultra low noise, transformerless SMT circuitry.
- Wide dynamic range.
- High strength heat-treated steel mesh head.
- Durable satin nickel finish.
- Internal capsule shock mounting.
- Supplied complete with soft pouch and clip.
- Designed and manufactured in Sydney, Australia.
- SM6 Shockmount
- XLR Cable
- Microphone Dust Cover
- Exclusive NT2-A Recording Techniques DVD w/John Merchant
- Requires +48V phantom power