Behringer MicroPower PS400 48V Phantom Power Supply
PKR 11,500
Phantom Power to Go!
Need phantom power? Grab the Behringer MicroPower PS400 phantom power supply, and power up! Just plug in the included power supply, and you’re ready to supply either 12V or 48V of phantom power to your condenser mic. Connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. If you need phantom power, look no further than the Behringer MicroPower PS400.
- Selectable 12V/48V phantom power
- Powered by included power supply
- All-metal construction
- Low-noise signal path
- Compact and portable
Related products
RODE Ai-KIT (Mic with Interface Pack)
A Complete Mic + Interface Bundle from RODE
With the RODE NT1 microphone/Ai-1 USB audio interface bundle, you're equipped to capture pristine, low-noise vocals and instrument audio anywhere you go. The RODE NT1 microphone has a present, full-bodied sound that takes vocals and acoustic instruments to the front of a mix without much sweetening. Sporting a mere 4.5dBA of self-noise, the NT1 is far and away one of the quietest mics in its class. Patented Lyre capsule suspension technology from Rycote isolates the NT1 from even the natural harmonic resonance of its aluminum body. This mic is a perfect mate for the included RODE Ai-1 interface, which features a USB-C connection for bus power and easy compatibility with modern laptops. Rounding out the package are the RODE SRM combination shockmount-pop shield, which reduces handling noise and "p" pops as you record, as well as a rugged mic cable.- Includes the RODE NT1 condenser microphone, Ai-1 USB audio interface, SRM combination shockmount/pop shield, and an XLR mic cable
- All you need to start enjoying great recordings at home or on the go
- NT1 microphone is present yet full bodied for an up-front sound without much sweetening
- 4.5dB self-noise — one of the quietest mics in its class
- 137dB SPL handling — stands up to guitar cabs and drums
- Rycote Lyre suspension isolates the capsule from the body
- Ai-1 audio interface is compact and capable
- Accurate mixing and monitoring via balanced 1/4" outs and high-quality onboard headphone amp
- USB-C connection provides bus power and direct compatibility with modern laptops
- Zero-latency monitoring
- +48V phantom power
- Includes the SMR shockmount/pop filter and an XLR cable
Nady PCM-100 Classic Condenser Mic
Sterling acoustics and a retro vibe.
The Nady PCM-100 Classic Condenser Mic is perfect for broadcasting and stage vocal use. It is versatile in the studio, too. The Nady PCM-100 mic features a high-quality electret condenser element, cardioid polar pattern, and a smooth frequency response tailored for vivid vocal reproduction with a perfectly positioned presence peak. Switchable low-cut filter. Integral mic holder mount. Comes with foam-padded plastic carrying case. Requires phantom power.
- Perfect for broadcasting and stage vocal use
- Versatile in the studio
- High-quality electret condenser element Cardioid polar pattern
- Smooth frequency response with a presence peak tailored for vocals
Behringer B-2 PRO Condenser Microphone Pack
The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included. Requires phantom power.
- 1" dual-diaphragm condenser microphone
- Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule
- Exceptionally flat frequency response (20Hz-20kHz)
- Selectable cardioid, omnidirectional, or figure-8 pickup pattern
- Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8)
- Low-frequency roll-off switch
- Input attenuation of -10dB
- Ultralow-noise transformerless FET input circuitry
- Impedance: nominal - 1 kohm
- Gold-plated 3-pin XLR output connector
- Rugged construction with satin nickel-plated brass body
RODE NT1-A Pack
An Incredible Condenser Mic Plus Essential Accessories!
The RODE NT1-A cardioid condenser microphone is one of the world's quietest microphones, and it comes complete with a ton of essential accessories! Its ultra-low self-noise means you'll effortlessly capture clean, clear audio. The NT1-A can handle 137dB SPL so you can be confident that even in front of loud guitar cabinets, your recording won't distort due to overload. This great mic comes with a shockmount, a pop screen, a dust cover, an XLR cable, and more. By providing ultra-quiet operation and being versatile enough to handle a wide variety of signals, the NT1-A is an affordable studio solution! The NT1-A is just as at home in front of a world class vocalist as it is in front of a guitar cabinet. Acoustic guitars sing through the NT1-A, and the 137dB SPL prevents overloads no matter what the sound source. The low self-noise ensures that even the faintest whisper will be captured with exceptional detail. The NT1-A gives you world-class sound. Its classy, satin-finished, nickel-plated body looks right at home in any studio. And you get everything you need in this package - RODE includes a dedicated shockmount, a quality pop filter, a dust cover, a quality XLR cable, and even an instructional DVD. RODE NT1-A Condenser Microphone Features at a Glance:- Acoustic Principle: Externally polarized 1" condenser with gold-plated membrane
- Active Electronics: JFET impedance converter with bipolar output buffer
- Pickup Pattern: Cardioid
- Frequency Response: 20Hz-20kHz
- Dynamic Range: > 132dB
- Maximum SPL: 137dB
- Cardioid Polar Pattern
- Ultra-low noise transformerless circuitry
- State-of-the-art surface-mount electronics
- Heavy-duty satin-nickel finish
- Internal shockmounting system
- Gold plated output connectors
- True Condenser (externally biased)
- Full (20Hz-20kHz) frequency response
- Includes shockmount, pop shield, XLR cable, mic dust cover, and instructional DVD
- Requires +48-volt phantom power