Power Amplifiers
Showing all 8 results
Behringer iNuke NU4-6000
A Flexible Amplifier for All Live Sound Applications
We were impressed with the Behringer iNuke NU4-6000 power amplifier because it packs four powerful channels of amplification into a compact, flexible design. You can power two mains at 1,500 watts each while powering your subwoofer in bridged-mono mode at 3,000 watts. Or power your mains and run two separate monitor mixes through it. However you use it, the Behringer iNuke NU4-6000 gives you a lot of power in a single, compact amplifier.- Four-channel Class D power amp delivers 4 x 1,500W (2 ohms) or 2 x 3,000W (4 ohms)
- Built-in 3-way crossovers make it easy to combine main speakers with subwoofers
- Detented, illuminated gain controls allow for precise level setting
- Switch-mode power supply provides noise-free audio and exceptional transient response
- Built-in limiters provide reliable overload protection to protect your speakers
Behringer iNUKE NU6000DSP
Tons of Power and Control
Tired of running out of PA power at gigs? Want more headroom and thump? The Behringer iNUKE NU6000DSP offers dual 3,000W power amps at a 4 ohm load, how is that for power? Weighing in at only 12 pounds, the NU6000DSP runs cool thanks to the revolutionary Class-D technology with "near-zero" thermal buildup. You can easily integrate this power amp into your rig thanks to the universal XLR / 1/4" combo jacks and speakON outputs. The iNUKE NU6000DSP power amp also features high-performance DSP, 24-bit/96kHz converters, and a USB interface.- 6,000W total - 2 x 3000W @ 4 Ohms
- USB interface
- DSP section
- Subwoofer crossover
- 24-bit/96kHz converters
- "Zero-Attack" limiters
- Ultra-efficient switch-mode power supply
- Class-D technology
Behringer Europower EP4000
Powerful, road-tough unit for medium and larger gigs.
Features
The rackmount EP4000 EUROPOWER power amp from Behringer delivers up to 2 x 2,000W at 2 ohms, 2 x 1400W at 4 ohms, and 4,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.
- 2 x 2,000 Watts into 2 ohms; 2 x 1400 Watts into 4 ohms; 4,000 Watts into 4 ohms (bridge mode)
- Precise Power, Signal and Clip LEDs to monitor performance
- XLR and 1/4" TRS input connectors for compatibility with any source
- Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
- Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies
- Independent limiters per channel offer reliable protection against overload and distortion
- High-current toroidal transformer for ultra-high transient response and absolute reliability
- Ultrareliable Toshiba/Fairchild power transistors
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- Back-to-front ventilation system including air filter for reliable operation
- "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
- High-quality components and exceptionally rugged construction ensure long life
Samson SX-1800 Power Amp
SX Series Power From Samson!
SX Series Amplifiers are built around a new power-core design, with oversized toroidal transformers and extra-large extruded heat sinks. They stay cool thanks to an innovative dual-tunnel forced-air cooling system with temperature-sensitive variable speed fans. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage assures total reliability under the most demanding conditions. Monitoring is simple thanks to front-panel Power, Signal, Peak and Protection LED indicators. Operation is simple thanks to Left and Right input level controls. Even hook-ups are easy, thanks to the XLR/1/4" TRS balanced inputs and 5-way binding post and Speakon outputs. SX-1800 Power Amplifier Features:- Professional Class AB Power Amplifier
- 400W per side @ 8 Ohms
- 600W per side @ 4 Ohms
- 1,200W bridged mono @ 8 Ohms
- Dual Variable-speed Fan Cooling System
- Signal, Peak, and Protection Circuit Indicators
- 5-way Binding Post and Speakon Speaker Outputs
- XLR and TRS Input Connections
- 2RU Design
Samson SX-2400 Power Amp
SX Series Power From Samson!
SX Series Amplifiers are built around a new power-core design, with oversized toroidal transformers and extra-large extruded heat sinks. They stay cool thanks to an innovative dual-tunnel forced-air cooling system with temperature-sensitive variable speed fans. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage assures total reliability under the most demanding conditions. Monitoring is simple thanks to front-panel Power, Signal, Peak and Protection LED indicators. Operation is simple thanks to Left and Right input level controls. Even hook-ups are easy, thanks to the XLR/1/4" TRS balanced inputs and 5-way binding post and Speakon outputs. SX-2400 Power Amplifier Features:- Professional High Power Rail Switching Amplifier
- 550W per side @ 8 Ohms
- 750W per side @ 4 Ohms
- 1,500W bridged mono @ 8 Ohms
- Dual Variable-speed Fan Cooling System
- Signal, Peak, and Protection Circuit Indicators
- 5-way Binding Post and Speakon Speaker Outputs
- XLR and TRS Input Connections
- 2RU Design
Samson SX-2800 Power Amp
SX Series Power From Samson!
SX Series Amplifiers are built around a new power-core design, with oversized toroidal transformers and extra-large extruded heat sinks. They stay cool thanks to an innovative dual-tunnel forced-air cooling system with temperature-sensitive variable speed fans. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage assures total reliability under the most demanding conditions. Monitoring is simple thanks to front-panel Power, Signal, Peak and Protection LED indicators. Operation is simple thanks to Left and Right input level controls. Even hook-ups are easy, thanks to the XLR/1/4" TRS balanced inputs and 5-way binding post and Speakon outputs. SX-2800 Power Amplifier Features:- Professional High Power Rail Switching Amplifier
- 700W per side @ 8 Ohms
- 900W per side @ 4 Ohms
- 1,800W bridged mono @ 8 Ohms
- Dual Variable-speed Fan Cooling System
- Signal, Peak, and Protection Circuit Indicators
- 5-way Binding Post and Speakon Speaker Outputs
- XLR and TRS Input Connections
- 2RU Design
Behringer KM1700
1,700-watt 2-channel Power Amplifier with Accelerated Transient Response
Sold out!
not rated
Call for Price
Read more
Yamaha RX-V381 AV Receiver Amplifier
This 5.1-channel AV Receiver combines the sophistication of HDMI® with support for 4K60p (4:4:4), HDCP2.2, HDR and BT.2020 with Bluetooth® for wireless music streaming and the convenience of YPAO™, front USB input and Eco mode.
- 5-channel powerful surround sound
- --- 70 W per Channel (6 ohms, 20 Hz-20 kHz, 0.09 % THD, 2 ch driven)
- --- 100 W per Channel (6 ohms, 1 kHz, 0.9 % THD, 1 ch driven)
- --- 140 per Channel (6 ohms, 1 kHz, 10% THD, 1ch driven)
- Discrete amp configuration
- Bluetooth® for wireless music streaming
- Compressed Music Enhancer for Bluetooth
- HDMI® (4 in / 1 out) 4K Ultra HD Full Support with 4K60p (4:4:4), HDCP2.2 (4 in / 1 out), HDR Video and BT.2020 pass-through
- Front panel USB Digital Connection for USB thumbdrives
- YPAO™ sound optimisation for automatic speaker setup
- Dialogue Level Adjustment for proper sound balance with dialogue and vocals
- Virtual CINEMA FRONT provides virtual surround sound with 5 speakers in front
- Multi-language colour OSD capable of displaying cover art
- ECO mode operation for about 20% less power consumption